HD76956: DRAFTING (INTDRAFT) - CATIA IS FORCED TO TERMINATE WHEN CREATE / MODIFY CLIPPING IS PERFORMED

APAR status

• Closed as program error.

Error description

• Scenario :
  1- File / Open the CATDrawing file
  2- Delete 'Line.1' on the 'Sheet.1' : the color
  of 'Dimension.2' changed to 'Pink' from 'Blue'.
  3- Click 'Dimension.2' on the 'Sheet.1' by MB3.
  4- Select 'Dimension.2 object' / 'Create/Modify
  Clipping' on the contextual menu.
  5- Click two places
  'Drawing Error' message box is displayed.
  And click 'OK'.
  'Error' message box is displayed.
  CATIA is forced to terminate because Abend Trace
  is outputted.
  Expected Result:
  CATIA should not be forced to terminate when
  Create / Modify Clipping is performed to
  Dimension2.
  .
  

Local fix

Problem summary

• DRAFTING (INTDRAFT) - CATIA is forced to terminate when Create
  / Modify Clipping is performed
  Scenario :
  1- File / Open the CATDrawing file
  2- Delete 'Line.1' on the 'Sheet.1' : the color
  of 'Dimension.2' changed to 'Pink' from 'Blue'.
  3- Click 'Dimension.2' on the 'Sheet.1' by MB3.
  4- Select 'Dimension.2 object' / 'Create/Modify
  Clipping' on the contextual menu.
  5- Click two places
  'Drawing Error' message box is displayed.
  And click 'OK'.
  'Error' message box is displayed.
  CATIA is forced to terminate because Abend Trace
  is outputted.
  Expected Result:
  CATIA should not be forced to terminate when
  Create / Modify Clipping is performed to
  Dimension2.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R18SP08 AND V5R19SP03
  Incident Diagnosis
  Clipping a not-up-to-date dimension lead to the
  display of an error dialog box.
  Correction Explanation
  The update run by the clipping command was not
  the correct one. By this correction, the update
  mode has been changed and now not-up-to-date
  dimensions can also be clipped.
  Answer and By-Pass
  This problem has been corrected on V5R18 SP8
  and V5R19 SP3.
  There is no by-pass.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN SP51808

     UP09/02/24 I 1000