HD76410: GSD / SPLINE IS CREATED IN THE DIRECTION OF THE TANGENT OF THE

APAR status

• Closed as program error.

Error description

• GSD / Spline is created in the direction of the
  tangent of the selected line.
  Scenario>
  1) Open File ".CATPart".
  (Workbench : "GSD". )
  2) Click "Spline" icon.
  >> "Spline Definition" dialog box is displayed.
  3) Select point of "Intersect.1" in the geometry as
  "Points" Element.
  >> Points : Intersect.1\Vertex.1
  4) Select Line of "Intersect.1" in the geometry as
  "Tangents Dir" Element.
  >> Tangents Dir : Intersect.1
  >>It does not become in the direction of a tangent
  of the selected element.
  5) Select "Point.3" in the tree as "Points" Element.
  6) Select "OK" in the "Spline Definition" dialog
  box. >> "Spline.1" is created
  .
  Spline is not created in the direction of a tangent to
  the selected line.
  < Result >
  Spline is not created in the direction of a tangent to
  the selected line.
  .
  < Expected result >
  Spline is created in the direction of the tangent of
  the selected line.
  .
  

Local fix

Problem summary

• GSD / Spline is created in the direction of the tangent of the
  selected line
  GSD / Spline is created in the direction of the
  tangent of the selected line.
  Scenario>
  1) Open File ".CATPart".
  (Workbench : "GSD". )
  2) Click "Spline" icon.
  >> "Spline Definition" dialog box is displayed.
  3) Select point of "Intersect.1" in the geometry as
  "Points" Element.
  >> Points : Intersect.1\Vertex.1
  4) Select Line of "Intersect.1" in the geometry as
  "Tangents Dir" Element.
  >> Tangents Dir : Intersect.1
  >>It does not become in the direction of a tangent
  of the selected element.
  5) Select "Point.3" in the tree as "Points" Element.
  6) Select "OK" in the "Spline Definition" dialog
  box. >> "Spline.1" is created
  .
  Spline is not created in the direction of a tangent to
  the selected line.
  < Result >
  Spline is not created in the direction of a tangent to
  the selected line.
  .
  < Expected result >
  Spline is created in the direction of the tangent of
  the selected line.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP02
  INCIDENT DIAGNOSIS
  Spline is not created in the direction of a tangent to
  the selected line.
  CORRECTION EXPLANATION
  The Problem is Corrected Now excpected behviour
  is achieved Spline can be created in the direction of
  a tangent to the selected line.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP