HD76376: PART DESIGN / ADD WHICH EXIST IN THE BODY CAN NOT

APAR status

• Closed as program error.

Error description

• PART DESIGN / ADD WHICH EXIST IN THE BODY
  CAN NOT CHANGE AN INPUT .
  Scenario:
  0) Start CATIA V5R18SP5.
  1) Open the file : CATPart
  Workbench : "Part Design".
  (Please confirm that "Work Object" exists in
  "Body.2".)
  2) Expand "Body.2" on the tree.
  (Please confirm that "Volume Extrude.1" and
  "Symmetry.1" exists
  on the tree through "Ordered Geometrical Set.1".)
  (Please confirm that "Volume Extrude.1" exists
  on the geometry area.)
  3) Select "Insert" > "Boolean Operations" >
  "Add" by menu bar.
  =>"Add" dialog box is displayed.
  4) Select "Symmetry.1" on the tree.
  5) Click "OK".
  =>"Add.1" is created under the "Body.2".
  6) Double-click "Add.1".
  =>"Add" dialog box is displayed.
  (Please confirm that the "Add" cell is activated.)
  7) Select "Volume Extrude.1" on the tree.
  =>"Feature Definition Error" is displayed.
  >>>This is problem.
  "Feature Definition Error" message.
  This feature cannot be used for boolean operation.
  < Result >
  The "Add" which exists in the "Body" position can
  not change an input when the volume feature
  exists through "Ordered Geometrical Set".
  < Result to expect >
  The "Add" which exists in the "Body" position
  should be able to change an input even if the
  volume feature exists through "Ordered
  Geometrical Set". Because the target element
  exists on the geometry area.
  .
  .
  

Local fix

Problem summary

• PART DESIGN / ADD WHICH EXIST IN THE BODY CAN NOT
  CHANGE AN INPUT .
  PART DESIGN / ADD WHICH EXIST IN THE BODY
  CAN NOT CHANGE AN INPUT .
  Scenario:
  0) Start CATIA V5R18SP5.
  1) Open the file : CATPart
  Workbench : "Part Design".
  (Please confirm that "Work Object" exists in
  "Body.2".)
  2) Expand "Body.2" on the tree.
  (Please confirm that "Volume Extrude.1" and
  "Symmetry.1" exists
  on the tree through "Ordered Geometrical Set.1".)
  (Please confirm that "Volume Extrude.1" exists
  on the geometry area.)
  3) Select "Insert" > "Boolean Operations" >
  "Add" by menu bar.
  =>"Add" dialog box is displayed.
  4) Select "Symmetry.1" on the tree.
  5) Click "OK".
  =>"Add.1" is created under the "Body.2".
  6) Double-click "Add.1".
  =>"Add" dialog box is displayed.
  (Please confirm that the "Add" cell is activated.)
  7) Select "Volume Extrude.1" on the tree.
  =>"Feature Definition Error" is displayed.
  >>>This is problem.
  "Feature Definition Error" message.
  This feature cannot be used for boolean operation.
  < Result >
  The "Add" which exists in the "Body" position can
  not change an input when the volume feature
  exists through "Ordered Geometrical Set".
  < Result to expect >
  The "Add" which exists in the "Body" position
  should be able to change an input even if the
  volume feature exists through "Ordered
  Geometrical Set". Because the target element
  exists on the geometry area.
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP02.
  INCIDENT DIAGNOSIS
  Part Design/ Add which exist in the Body cannot
  change an Input
  CORRECTION EXPLANATION
  Behaviour is corrected and modified
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP