HD75213: 2D-3D: INTERSECT 3D ELEMENTS DOES NOT WORK FOR SECTION VIEW IF ELEMENT IS MOVED ON PRODUCT.

APAR status

• Closed as program error.

Error description

• 2D-3D: INTERSECT 3D ELEMENTS DOES NOT
  WORK FOR SECTION VIEW IF ELEMENT IS MOVED
  ON PRODUCT.
  THE PROBLEM WAS REPORTED ON V5R17SP06
  (06/18/2007).
  THE PROBLEM IS REPRODUCIBLE ON CXR18SP06
  (06/11/2008).
  THE PROBLEM IS REPRODUCIBLE ON CXR19GA
  (06/11/2008).
  .
  Scenario:
  1. Launch CATIA.
  2. Open data ?V504317.CATProduct".
  3. Double-click on Layout in "BBB". Display LO1
  window.
  4. Select the "New View From" command.
  5. After activating the "V504317.CATProduct"
  window, select the ?zx Plane? of "AAA".
  6. Select the "Section View" as Tool Palette type.
  7. After activating the Layout window, Click a
  suitable place.  Section View is created.
  8. Activate the Section View and perform
  the "Intersect 3D Elements" command and click on
  Pad.1 of "AAA".
  9. Intersection is not created in layout. This is a
  problem.
  .
  

Local fix

Problem summary

• 2D-3D: INTERSECT 3D ELEMENTS DOES NOT WORK FOR SECTION VIEW IF
  ELEMENT IS MOVED ON PRODUCT.
  2D-3D: INTERSECT 3D ELEMENTS DOES NOT
  WORK FOR SECTION VIEW IF ELEMENT IS MOVED
  ON PRODUCT.
  THE PROBLEM WAS REPORTED ON V5R17SP06
  (06/18/2007).
  THE PROBLEM IS REPRODUCIBLE ON CXR18SP06
  (06/11/2008).
  THE PROBLEM IS REPRODUCIBLE ON CXR19GA
  (06/11/2008).
  .
  Scenario:
  1. Launch CATIA.
  2. Open data ?V504317.CATProduct".
  3. Double-click on Layout in "BBB". Display LO1
  window.
  4. Select the "New View From" command.
  5. After activating the "V504317.CATProduct"
  window, select the ?zx Plane? of "AAA".
  6. Select the "Section View" as Tool Palette type.
  7. After activating the Layout window, Click a
  suitable place.  Section View is created.
  8. Activate the Section View and perform
  the "Intersect 3D Elements" command and click on
  Pad.1 of "AAA".
  9. Intersection is not created in layout. This is a
  problem.
  .
  

Problem conclusion

• NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R20 GA, V5R19Sp1 and V5R18SP06.
  Incident Diagnosis:
  2D-3D: INTERSECT 3D ELEMENTS DOES NOT
  WORK FOR SECTION VIEW IF ELEMENT IS MOVED
  ON PRODUCT.
  Correction Explanation:
  Now, Intersection of Pad is successfully taken in
  section view.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R518 PSN SP51866

     UP08/08/19 I 1000