HD74979: MANUFACTURING ( PMG): AUTOMATIC ROTABL STRATEGY GENERATES WRONG ANGULAR APTSOURCE OUTPUT

APAR status

• Closed as program error.

Error description

• MANUFACTURING ( PMG): AUTOMATIC ROTABL
  STRATEGY GENERATES WRONG ANGULAR
  APTSOURCE OUTPUT
  .
  1) Open the CATProcess
  2) Generate the apt for the 2 manf programs.
  .
  Result :
  for 1st manf Prog( 2 seperate drilling operations)
  .
  ROTABL/ATANGL, -90.000000 (Correct Value)
  ...
  ROTABL/ATANGL, -270.000000 (Correct Value)
  .
  For 2nd manf prog ( 1 drill operation with
  Automatic ROTABL option selected ) :
  .
  ROTABL/ATANGL, -90.000000 (Correct Value)
  ...
  ROTABL/ATANGL, 270.000000 (Incorrect Value)
  .
  EXPECTED RESULT :
  .
  For 2nd Manf program, the apt values should be :
  ROTABL/ATANGL, -90.000000 (Correct Value)
  ...
  ROTABL/ATANGL, -270.000000 (Correct Value)
  .
  

Local fix

Problem summary

• MANUFACTURING ( PMG): AUTOMATIC ROTABL STRATEGY GENERATES WRONG
  ANGULAR APTSOURCE OUTPUT
  MANUFACTURING ( PMG): AUTOMATIC ROTABL
  STRATEGY GENERATES WRONG ANGULAR
  APTSOURCE OUTPUT
  .
  1) Open the CATProcess
  2) Generate the apt for the 2 manf programs.
  .
  Result :
  for 1st manf Prog( 2 seperate drilling operations)
  .
  ROTABL/ATANGL, -90.000000 (Correct Value)
  ...
  ROTABL/ATANGL, -270.000000 (Correct Value)
  .
  For 2nd manf prog ( 1 drill operation with
  Automatic ROTABL option selected ) :
  .
  ROTABL/ATANGL, -90.000000 (Correct Value)
  ...
  ROTABL/ATANGL, 270.000000 (Incorrect Value)
  .
  EXPECTED RESULT :
  .
  For 2nd Manf program, the apt values should be :
  ROTABL/ATANGL, -90.000000 (Correct Value)
  ...
  ROTABL/ATANGL, -270.000000 (Correct Value)
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R19SP01 AND ON V5R18SP06
  Incident Diagnosis
  In Case of drilling operation. AUTOMATIC ROTABL
  STRATEGY GENERATES WRONG ANGULAR
  APTSOURCE OUTPUT.
  The angle passed to toolpath calculation was
  incorrect.
  .
  Correction Explanation
  The code has been corrected so that correct angle
  value is passed to tool path calculation.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN SP51866

     UP08/08/19 I 1000