HD74938: CANNOT OPEN 2 PRODUCTS IN DIFFERENT CATIA WINDOWS FROM 1 PSN

APAR status

• Closed as unreproducible in next release.

Error description

• ABSTRACT: CV5: Cannot open 2 Products in
  different CATIA Windows from 1 PSN.
  .
  SCENARIO:
  1. Open a simple assembly in a PSN, select one
  CATIA V5 3d document,select 'Open selected
  model in CATIA V5' and open the document with
  the option 'Open in a new CATIA V5 Product'
  .
  2. Select a second CATIA V5
  document,select 'Open selected
  model in CATIA V5' and open the document with
  the option 'Open in a new CATIA V5 Product'.
  .
  RESULT:-
  An error message occur, to open 2 CATIA V5
  windows from the same PSN is not possible
  .
  ==> Error message:
  .
  CNEXT - CATEnoviaErrors - ERR_0217
  .
  "The Document xyz (Enovia VPM) is already open
  or loaded in the session. Close all documents in
  Catia first and then reopen from VPM"OK.
  .
  

Local fix

Problem summary

• Cannot open 2 Products in different CATIA Windows from 1 PSN
  ABSTRACT: CV5: Cannot open 2 Products in
  different CATIA Windows from 1 PSN.
  .
  SCENARIO:
  1. Open a simple assembly in a PSN, select one
  CATIA V5 3d document,select 'Open selected
  model in CATIA V5' and open the document with
  the option 'Open in a new CATIA V5 Product'
  .
  2. Select a second CATIA V5
  document,select 'Open selected
  model in CATIA V5' and open the document with
  the option 'Open in a new CATIA V5 Product'.
  .
  RESULT:-
  An error message occur, to open 2 CATIA V5
  windows from the same PSN is not possible
  .
  ==> Error message:
  .
  CNEXT - CATEnoviaErrors - ERR_0217
  .
  "The Document xyz (Enovia VPM) is already open
  or loaded in the session. Close all documents in
  Catia first and then reopen from VPM"OK.
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON CATIA
  VERSION 5 RELEASE 18.
  THIS PROBLEM IS NOT REPRODUCIBLE ON CATIA
  VERSION 5 RELEASE 19 GA LEVEL.
  AND ON V5R18SP06
  .
  Incident Diagnosis:
  CV5: Cannot open 2 Products in different CATIA
  Windows from 1 PSN
  .
  Answer and By-Pass:
  To correct this behaviour the following CV5
  Environment variable should be exported:
  CV5_VPM_ALLOWSAMEROOTPRD=1
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 HP-UX

• Fixed component ID

  569102000

Applicable component levels

• R518 PSN SP51866

     UP08/08/19 I 1000