HD74128: ERRORS WITH GETFORM() OF THE CATITPSTOLERANCEZONE

APAR status

• Closed as program error.

Error description

• Problem:
  Errors with GetForm() of the
  CATITPSToleranceZone
  .
  Scenario:
  1. Build the sample workspace.
  2. Run the provided XXX.sh files.
  ->The goal of the batch is to demonstrate an issue
  with the method GetForm() of the
  CATITPSToleranceZone CAA Interface.
  These batch load a CATProduct document
  containing a ToleranceZone.CATPart.
  3. Check the output.
  ->
  ----------------------------------------------------
  | Tolerance 6                                      |
  ----------------------------------------------------
  ...
  Tolerance zone data:
  Tolerance zone value:       0.100 mm
  Tolerance zone form:        Volume defined by
  sphere
  Associative group of TPS:    1 associated TPS
  Position.3
  ...
  ----------------------------------------------------
  | Tolerance 8                                      |
  ----------------------------------------------------
  ...
  Tolerance zone data:
  Tolerance zone value:       0.100 mm
  Tolerance zone form:        Volume defined by
  sphere
  Associative group of TPS:    1 associated TPS
  Position.4
  ...
  ----------------------------------------------------
  .
  Result:
  For both Position.3 and Position.4, the Tolerance
  zone returned is "Volume Defiend By Sphere".
  But in the drawing zone mentioned is "cylindrical
  zone"
  .
  Additional Information:
  1. Launch the CATIA and open the CATProduct.
  2. Double click on the ..\Geometrical
  Tolerances\Position.3. Click OK.
  -> Tolerance Value Symbol is changed.
  3. Do the same for Position.4 and Position.5
  -> Tolerance Value Symbols are changed.
  3. Also for Position.3 and Position.4 for which
  tolerance zone returned is "Volume Defiend By
  Sphere", "S" is absent in the tolerance value.
  .
  

Local fix

Problem summary

• Errors with GetForm() of the CATITPSToleranceZone
  Problem:
  Errors with GetForm() of the
  CATITPSToleranceZone
  .
  Scenario:
  1. Build the sample workspace.
  2. Run the provided XXX.sh files.
  ->The goal of the batch is to demonstrate an issue
  with the method GetForm() of the
  CATITPSToleranceZone CAA Interface.
  These batch load a CATProduct document
  containing a ToleranceZone.CATPart.
  3. Check the output.
  ->
  ----------------------------------------------------
  | Tolerance 6                                      |
  ----------------------------------------------------
  ...
  Tolerance zone data:
  Tolerance zone value:       0.100 mm
  Tolerance zone form:        Volume defined by
  sphere
  Associative group of TPS:    1 associated TPS
  Position.3
  ...
  ----------------------------------------------------
  | Tolerance 8                                      |
  ----------------------------------------------------
  ...
  Tolerance zone data:
  Tolerance zone value:       0.100 mm
  Tolerance zone form:        Volume defined by
  sphere
  Associative group of TPS:    1 associated TPS
  Position.4
  ...
  ----------------------------------------------------
  .
  Result:
  For both Position.3 and Position.4, the Tolerance
  zone returned is "Volume Defiend By Sphere".
  But in the drawing zone mentioned is "cylindrical
  zone"
  .
  Additional Information:
  1. Launch the CATIA and open the CATProduct.
  2. Double click on the ..\Geometrical
  Tolerances\Position.3. Click OK.
  -> Tolerance Value Symbol is changed.
  3. Do the same for Position.4 and Position.5
  -> Tolerance Value Symbols are changed.
  3. Also for Position.3 and Position.4 for which
  tolerance zone returned is "Volume Defiend By
  Sphere", "S" is absent in the tolerance value.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA
  V5R19SP01.
  .
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51901

     UP08/10/03 I 1000