HD73690: WARM START: WARM START FAILS AND CATIA IS FORCED TO TERMINATE.

APAR status

• Closed as unreproducible in next release.

Error description

• WARM START: WARM START FAILS AND CATIA IS
  FORCED TO TERMINATE.
  .
  SETTINGS:
  Set 'Incremental backup' to ON.
  .
  SCENARIO:
  0. Start CATIA.
  1. Open the file: 'TOP.CATProduct'.
  Workbench: 'Product Structure'.
  2. Double click '02' on the tree. '02' is activated.
  Workbench changed to GSD.
  3. Click 'Point' on the tool bar. 'Point Definition'
  dialog box is displayed. And click 'OK'. 'Point.1' is
  created.
  4. Open the file: 'P00273.CATPart'. Workbench:
  Generative Shape Design.
  5. Click 'Corner' on the tool bar. 'Corner Definition'
  dialog box is displayed. Refer to the value of set up
  below.
  Corner Type: 3D Corner
  Element 1: Curve.1
  Element 2: Curve.2.
  'Runtime exception' dialog box is displayed. And
  click 'OK'. CATIA is forced to terminate.
  7. Restart CATIA.
  8. 'Warm-start' dialog box is displayed. And
  click 'OK'. Warm start starts. 'Warm start fail
  message' is displayed. And click 'OK'. CATIA is
  ended and the data edited on 'TOP.Product' is not
  restored. This is problem.
  .
  .
  

Local fix

Problem summary

• WARM START: WARM START FAILS AND CATIA IS FORCED TO TERMINATE.
  WARM START: WARM START FAILS AND CATIA IS
  FORCED TO TERMINATE.
  .
  SETTINGS:
  Set 'Incremental backup' to ON.
  .
  SCENARIO:
  0. Start CATIA.
  1. Open the file: 'TOP.CATProduct'.
  Workbench: 'Product Structure'.
  2. Double click '02' on the tree. '02' is activated.
  Workbench changed to GSD.
  3. Click 'Point' on the tool bar. 'Point Definition'
  dialog box is displayed. And click 'OK'. 'Point.1' is
  created.
  4. Open the file: 'P00273.CATPart'. Workbench:
  Generative Shape Design.
  5. Click 'Corner' on the tool bar. 'Corner Definition'
  dialog box is displayed. Refer to the value of set up
  below.
  Corner Type: 3D Corner
  Element 1: Curve.1
  Element 2: Curve.2.
  'Runtime exception' dialog box is displayed. And
  click 'OK'. CATIA is forced to terminate.
  7. Restart CATIA.
  8. 'Warm-start' dialog box is displayed. And
  click 'OK'. Warm start starts. 'Warm start fail
  message' is displayed. And click 'OK'. CATIA is
  ended and the data edited on 'TOP.Product' is not
  restored. This is problem.
  .
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON CATIA
  VERSION 5 RELEASE 17.
  THIS PROBLEM IS NOT REPRODUCIBLE ON CATIA
  VERSION 5 RELEASE 19 GA LEVEL.
  AND ON V5R18SP05
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN SP51805

     UP08/06/02 I 1000