HD73171: PART: TRANSLATE - PARAMETER OF TRANSLATE IS KEPT AFTER

APAR status

• Closed as program error.

Error description

• PART: TRANSLATE - PARAMETER OF TRANSLATE IS
  KEPT AFTER CHANGING TYPE OF TRANSLATE.
  .
  SCENARIO:
  1. Open V504169.CATPart.
  2. Double click on Translate.1.
  3. Change Vector Definition into Point to Point from
  Direction and distance.
  4. Select Point.1 as Start point.
  5. Select Point.2 as End point.
  6. Click OK button. Then, the Parameter which is
  not used is kept on a tree. This is the problem.
  .
  .
  

Local fix

Problem summary

• PART: TRANSLATE - PARAMETER OF TRANSLATE IS KEPT AFTER
  CHANGING TYPE OF TRANSLATE.
  PART: TRANSLATE - PARAMETER OF TRANSLATE IS
  KEPT AFTER CHANGING TYPE OF TRANSLATE.
  .
  SCENARIO:
  1. Open V504169.CATPart.
  2. Double click on Translate.1.
  3. Change Vector Definition into Point to Point from
  Direction and distance.
  4. Select Point.1 as Start point.
  5. Select Point.2 as End point.
  6. Click OK button. Then, the Parameter which is
  not used is kept on a tree. This is the problem.
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  Incident Diagnosis
  When we change the type of an input, the earlier paramater if
  it is created thorugh a relation, stays back. When it was just
  a
  simple constant it did not stay.
  .
  Correction Explanation
  The input (in this case distance) is deleted, when a change
  from one type to other happens. If the input is valuated
  through a relation, such a relation is deleted.
  .
  Additional Information:
  The problem is also corrected on V5R19 SP01 and on V5R18
  SP06 level.
  .
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN SP51901

     UP08/10/03 I 1000