HD72018: DRAFTING(GENDRAFT)/ THE COLOR OF THREAD DIMENSION IS

APAR status

• Closed as documentation error.

Error description

• DRAFTING(GENDRAFT)/ THE COLOR OF THREAD
  DIMENSION IS NOT CORRECT.
  .
  SCENARIO:
  0. Launch CATIA..
  1. Open CATPart.
  2. The hole on the Pad created by user's standards.
  3. Create a new CATDrawing.
  4. Create Front View using Hole face of the
  pad.
  5. Create Section View
  6. Create Thread Dimension on each View
  .
  RESULTS OBTAINED:
  The Thread dimension is created by purple color
  mentioned for Technological results.
  .
  EXPECTED RESULTS:
  The thread dimension should be created as
  mentioned in the documentation.
  .
  .
  

Local fix

Problem summary

• DRAFTING(GENDRAFT)/ THE COLOR OF THREAD DIMENSION IS
  NOT CORRECT.
  DRAFTING(GENDRAFT)/ THE COLOR OF THREAD
  DIMENSION IS NOT CORRECT.
  .
  SCENARIO:
  0. Launch CATIA..
  1. Open CATPart.
  2. The hole on the Pad created by user's standards.
  3. Create a new CATDrawing.
  4. Create Front View using Hole face of the
  pad.
  5. Create Section View
  6. Create Thread Dimension on each View
  .
  RESULTS OBTAINED:
  The Thread dimension is created by purple color
  mentioned for Technological results.
  .
  EXPECTED RESULTS:
  The thread dimension should be created as
  mentioned in the documentation.
  .
  .
  

Problem conclusion

• THIS MODIFICATION WILL BE INCLUDED IN THE
  DOCUMENTATION DELIVERED WITH CATIA
  VERSION 5 RELEASE 19 GA LEVEL.
  Incident diagnosis:
  .
  DRAFTING(GENDRAFT)/ THE COLOR OF THREAD
  DIMENSION IS NOT CORRECT.
  .
  Documentation Reference
  Mechanical Design / Generative Drafting /
  User Tasks / Dimension Generation / About
  Dimension Generation
  .
  MODIFICATION:
  From R18, when a description is associated to the
  3D thread, this description is always displayed
  when generated a thread dimension.
  .
  This point was set on specification.
  .
  ADDITIONAL INFORMATION:
  .
  In R19 documentation the following information is removed
  "When using personal standards including a thread description
  field, a fake dimension is displayed" is deleted from R19
  documentation.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels