HD69839: WHEN SAVING A SOLID EDGE FILE THAT HAS A WELDMENT. ATTRIBUTES NOT PASSED ON.

APAR status

• Closed as program error.

Error description

• When saving a Solid Edge file that has a
  weldment.  Attributes not passed on.
  Use attached files and attached customer computer
  on vmware.
  To reproduce:
  1. Open up a Solid Edge assembly ( .pwd file) that
  has the weldment file
  2. Do smarteam save on the assembly.
  3. The Top Assembly Solid Edge attributes (*.pwd)
  are saved from Solid Edge into ST and also for all
  other files in the
  structure, except of one file in the structure as
  2006332_a.par, which does not retain the Solid
  Edge attributes in Smarteam
  and even in SE File Properties the attribute
  Document Number mapped to Part Number is
  DELETED.
  Description from customer (workaround):
  ---
  If you open up the Top level assembly (.pwd file) in
  Solid Edge, the expand all branches and find the
  weldment file.
  Open up the weldment file (part 2006332_A)
  Preform a Smarteam Save on the file.
  All Solid Edge attributes (i.e. Part Number) are
  loaded and saved with within Smarteam.
  Now go to the Top Level Assembly (pwd file)
  Preform a smarteam save.
  All Attributes for all files are loaded and saved.
  .
  

Local fix

Problem summary

• When saving a Solid Edge file that has a weldment.  Attributes
  not passed on.
  When saving a Solid Edge file that has a
  weldment.  Attributes not passed on.
  Use attached files and attached customer computer
  on vmware.
  To reproduce:
  1. Open up a Solid Edge assembly ( .pwd file) that
  has the weldment file
  2. Do smarteam save on the assembly.
  3. The Top Assembly Solid Edge attributes (*.pwd)
  are saved from Solid Edge into ST and also for all
  other files in the
  structure, except of one file in the structure as
  2006332_a.par, which does not retain the Solid
  Edge attributes in Smarteam
  and even in SE File Properties the attribute
  Document Number mapped to Part Number is
  DELETED.
  Description from customer (workaround):
  ---
  If you open up the Top level assembly (.pwd file) in
  Solid Edge, the expand all branches and find the
  weldment file.
  Open up the weldment file (part 2006332_A)
  Preform a Smarteam Save on the file.
  All Solid Edge attributes (i.e. Part Number) are
  loaded and saved with within Smarteam.
  Now go to the Top Level Assembly (pwd file)
  Preform a smarteam save.
  All Attributes for all files are loaded and saved.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON SMARTEAM
  VERSION V5 RELEASE 19 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R17SP08.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  SMARTEAM NT>XP

• Fixed component ID

  569199970

Applicable component levels

• R518 PSN

     UP

• R517 PSN

     UP