HD68691: DMUKIN:THE POSITION OF CATPARTS IS NOT

APAR status

• Closed as program error.

Error description

• ABSTRACT:
  DMUKIN:THE POSITION OF CATPARTS IS NOT
  RESET BY "RESET POSITIONS" COMMAND AFTER
  KINEMATIC SIMULATION.(HF12)
  .
  SCENARIO:
  1. Launch CATIA V5R17SP6HF12
  2. Open the file "TEST.CATProduct"
  3. Go to "DMU Kinematics" w/b.
  4. Select Tools/Macro/Macros.. and then click
  on "Select" icon, select the "TEST.catvbs" from file
  and then click on "Run" icon.
  5. A window is displayed "Check Parts Origin
  Coordinates"
  6. Click on the "OK" button
  7. Excel sheet is created.
  8. Please confirm the all values are "0".
  9. Click on the "Update Position" icon.
  10.The "Update Mechanism" dialog box appears.
  11.Click on the "OK" button.
  12.Click on the "Reset Positions" icon.
  13.The "Reset Mechanism" dialog box appears.
  14.Select the "Reset the selected mechanism to the
  original state (at product load)".
  15.Click on the "OK" button.
  16.Select Tools/Macro/Macros.. and then click
  on "Select" icon, select the "TEST.catvbs" from file
  and then click on "Run" icon.
  17.Excel sheet is created.
  .
  RESULT:
  The position and angle of the CATPart is not reset.
  .
  EXPECTED RESULT:
  The position of the CATPart should be reset by
  Reset Positions command.
  .
  

Local fix

Problem summary

• DMUKIN:THE POSITION OF CATPARTS IS NOT RESET BY "RESET POSITION
  S" COMMAND AFTER KINEMATIC SIMULATION.
  ABSTRACT:
  DMUKIN:THE POSITION OF CATPARTS IS NOT
  RESET BY "RESET POSITIONS" COMMAND AFTER
  KINEMATIC SIMULATION.(HF12)
  .
  SCENARIO:
  1. Launch CATIA V5R17SP6HF12
  2. Open the file "TEST.CATProduct"
  3. Go to "DMU Kinematics" w/b.
  4. Select Tools/Macro/Macros.. and then click
  on "Select" icon, select the "TEST.catvbs" from file
  and then click on "Run" icon.
  5. A window is displayed "Check Parts Origin
  Coordinates"
  6. Click on the "OK" button
  7. Excel sheet is created.
  8. Please confirm the all values are "0".
  9. Click on the "Update Position" icon.
  10.The "Update Mechanism" dialog box appears.
  11.Click on the "OK" button.
  12.Click on the "Reset Positions" icon.
  13.The "Reset Mechanism" dialog box appears.
  14.Select the "Reset the selected mechanism to the
  original state (at product load)".
  15.Click on the "OK" button.
  16.Select Tools/Macro/Macros.. and then click
  on "Select" icon, select the "TEST.catvbs" from file
  and then click on "Run" icon.
  17.Excel sheet is created.
  .
  RESULT:
  The position and angle of the CATPart is not reset.
  .
  EXPECTED RESULT:
  The position of the CATPart should be reset by
  Reset Positions command.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 19 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R18SP03 & V5R17SP08.
  .
  Incident Diagnosis
  DMUKIN:THE POSITION OF CATPARTS IS NOT
  RESET BY 'RESET POSITIONS' COMMAND AFTER
  KINEMATIC SIMULATION.
  .
  Correction Explanation
  problem in the update and reset algorithms.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN SP51803

     UP08/01/25 I 1000

• R517 PSN

     UP