HD68609: SYNCHRONIZE TO ANY REVISION DOES NOT WORK ON AN ASSEMBLY DRAWI NG WHICH POINTS TO A PVR CATPRODUCT

APAR status

• Closed as unreproducible in next release.

Error description

• SYNCHRONIZE TO ANY REVISION  DOES NOT
  WORK ON AN ASSEMBLY DRAWING WHICH
  POINTS TO A PVR CATPRODUCT
  .
  SCENARIO:
  1) In order to activate PVR and PVS functionality
  the following environment
  variables are set in the Environment txt-file:
  ?VPMNav_CaptureContext=1?
  ?VPMV5_V5R17_PLUS=1?
  A] Preparation:
  .
  1) From Scratch build a simple assembly.
  No need to use a specific geometry in order to
  play the scenario.
  2) On the first assembly level underneath the PRC
  create a PVR.
  3) Based on the PVR create an assembly drawing.
  B]  Modify one of the detailed parts.
  .
  4) Close all open windows except the VPM-
  Navigator window.
  5) In VPM-Nav select the CATPart document of one
  of the two detailed
  parts and load it into CATIA 'out-of-context' into
  a single document
  window
  6) In CATIA modify the part.
  7) Save back the Part to ENOVIA (without creating
  new part version or
  document revision).
  8) Close the CATIA window.
  .
  C] Synchronize the PVR.
  .
  9) Open the PVR into CATIA.
  10) Synchronize the PVR to the exploded structure
  of the PRC
  11) Save the PVR back to ENOVIA (even if it tells,
  that it is up to date).
  by creating a new revision of the PVR.
  .
  D] Update the assembly drawing
  .
  12) Close all open CATIA windows except the VPM-
  Navigator.
  13) Open an impacted by Graph on the assembly
  drawing.
  =>it shows that a new revision of the PVR is
  available
  14) Open the Drawing into CATIA.
  15) Open the 'Edit / Links' Panel
  16) Switch to the pointed documents
  17) Select the button 'Replace with any revision' in
  order to synchronize
  the drawing to the new revision of the PVR.
  =>The All revisions window is displayed
  18) select the new revision of the PVR.
  19) Confirm with 'ok'.
  .
  ERROR - The following error messages are displayed
  Incident Report panel: with 2 lines
  Error Front - ... / Right view - ...
  One or several of Part instances referenced by the
  view cannot be found in the new Document.
  .
  

Local fix

Problem summary

• SYNCHRONIZE TO ANY REVISION  DOES NOT WORK ON AN ASSEMBLY DRAWI
  NG WHICH POINTS TO A PVR CATPRODUCT
  SYNCHRONIZE TO ANY REVISION  DOES NOT
  WORK ON AN ASSEMBLY DRAWING WHICH
  POINTS TO A PVR CATPRODUCT
  .
  SCENARIO:
  1) In order to activate PVR and PVS functionality
  the following environment
  variables are set in the Environment txt-file:
  ?VPMNav_CaptureContext=1?
  ?VPMV5_V5R17_PLUS=1?
  A  Preparation:
  .
  1) From Scratch build a simple assembly.
  No need to use a specific geometry in order to
  play the scenario.
  2) On the first assembly level underneath the PRC
  create a PVR.
  3) Based on the PVR create an assembly drawing.
  B   Modify one of the detailed parts.
  .
  4) Close all open windows except the VPM-
  Navigator window.
  5) In VPM-Nav select the CATPart document of one
  of the two detailed
  parts and load it into CATIA 'out-of-context' into
  a single document
  window
  6) In CATIA modify the part.
  7) Save back the Part to ENOVIA (without creating
  new part version or
  document revision).
  8) Close the CATIA window.
  .
  C  Synchronize the PVR.
  .
  9) Open the PVR into CATIA.
  10) Synchronize the PVR to the exploded structure
  of the PRC
  11) Save the PVR back to ENOVIA (even if it tells,
  that it is up to date).
  by creating a new revision of the PVR.
  .
  D  Update the assembly drawing
  .
  12) Close all open CATIA windows except the VPM-
  Navigator.
  13) Open an impacted by Graph on the assembly
  drawing.
  =>it shows that a new revision of the PVR is
  available
  14) Open the Drawing into CATIA.
  15) Open the 'Edit / Links' Panel
  16) Switch to the pointed documents
  17) Select the button 'Replace with any revision' in
  order to synchronize
  the drawing to the new revision of the PVR.
  =>The All revisions window is displayed
  18) select the new revision of the PVR.
  19) Confirm with 'ok'.
  .
  ERROR - The following error messages are
  displayed
  Incident Report panel: with 2 lines
  Error Front - ... / Right view - ...
  One or several of Part instances referenced by the
  view cannot be found in the new Document.
  .
  Please see ?14393.025.724_071017080000_071016-
  ZF-PMR14393.doc? file for detail scenario at
  material path.
  .
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  ENOVIA VERSION 5 RELEASE 17.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  ENOVIA VERSION 5 RELEASE 19 GA level AND ON
  V5R18SP02
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  ENOVIA V5 VPM N

• Fixed component ID

  569151400

Applicable component levels

• R518 PSN SP51802

     UP07/11/13 I 1000