HD68578: DOCUMENTATION: ERROR RANGE OF VALUDE BETWEEN

APAR status

• Closed as documentation error.

Error description

• DOCUMENTATION: ERROR RANGE OF VALUDE
  BETWEEN DESIGN & VISUALIZATION MODE
  .
  THE PROBLEM WAS REPORTED ON V5R17 GA.
  THE PROBLEM IS REPRODUCIBLE ON CXR19 (10-
  22-2007).
  .
  OS:
  Reported OS: WIN XP
  Tested OS: WIN XP SP2
  .
  SCENARIO:
  Please refer to the article on the following section
  in online documentation.
  1. Go to Assembly Design->User Tasks->Display
  the Assembly Mass Properties
  Note that values can be different due that
  geometry is not exact in Visualization mode, and
  has been approximated. A message is displayed in
  this case
  2. Though the mentioned-above article is inserted
  in online documentation,
  the following information is not inserted Please
  insert the following information
  into online documentation.
  .
  PROBLEM:
  Information in online documentation is not
  adequate.
  .
  EXPECTED RESULT:
  This information should be included in online
  documentation.
  1. Volume:
  1-1. Error range of values between design mode
  and visualization mode.
  1-2. If there is any factor which provides any
  influence to error range of values, please tell me
  that. (For example, when xx includes, error range
  of values also
  includes.)
  2. Mass
  2-1. Error range of values between design mode
  and visualization mode.
  2-2. If there is any factor which provides any
  influence to error range of values, please tell me
  that. (For example, when xx includes, error range
  of values also
  includes.)
  3. Surface
  3-1. Error range of values between design mode
  and visualization mode.
  3-2. If there is any factor which provides any
  influence to error range of values, please tell me
  that. (For example, when xx includes, error range
  of values also
  includes.)
  4. Inertia center
  4-1. Error range of values between design mode
  and visualization mode.
  4-2. If there is any factor which provides any
  influence to error range of values, please tell me
  that. (For example, when xx includes, error range
  of values also
  includes.)
  5. Inertia matrix
  5-1. Error range of values between design mode
  and visualization mode.
  5-2. If there is any factor which provides any
  influence to error range of values, please tell me
  that. (For example, when xx includs, error range of
  values also
  includes.)
  .
  

Local fix

Problem summary

• DOCUMENTATION: ERROR RANGE OF VALUDE BETWEEN
  DESIGN  VISUALIZATION MODE
  DOCUMENTATION: ERROR RANGE OF VALUDE
  BETWEEN DESIGN & VISUALIZATION MODE
  .
  THE PROBLEM WAS REPORTED ON V5R17 GA.
  THE PROBLEM IS REPRODUCIBLE ON CXR19 (10-
  22-2007).
  .
  OS:
  Reported OS: WIN XP
  Tested OS: WIN XP SP2
  .
  SCENARIO:
  Please refer to the article on the following section
  in online documentation.
  1. Go to Assembly Design->User Tasks->Display
  the Assembly Mass Properties
  Note that values can be different due that
  geometry is not exact in Visualization mode, and
  has been approximated. A message is displayed in
  this case
  2. Though the mentioned-above article is inserted
  in online documentation,
  the following information is not inserted Please
  insert the following information
  into online documentation.
  .
  PROBLEM:
  Information in online documentation is not
  adequate.
  .
  EXPECTED RESULT:
  This information should be included in online
  documentation.
  1. Volume:
  1-1. Error range of values between design mode
  and visualization mode.
  1-2. If there is any factor which provides any
  influence to error range of values, please tell me
  that. (For example, when xx includes, error range
  of values also
  includes.)
  2. Mass
  2-1. Error range of values between design mode
  and visualization mode.
  2-2. If there is any factor which provides any
  influence to error range of values, please tell me
  that. (For example, when xx includes, error range
  of values also
  includes.)
  3. Surface
  3-1. Error range of values between design mode
  and visualization mode.
  3-2. If there is any factor which provides any
  influence to error range of values, please tell me
  that. (For example, when xx includes, error range
  of values also
  includes.)
  4. Inertia center
  4-1. Error range of values between design mode
  and visualization mode.
  4-2. If there is any factor which provides any
  influence to error range of values, please tell me
  that. (For example, when xx includes, error range
  of values also
  includes.)
  5. Inertia matrix
  5-1. Error range of values between design mode
  and visualization mode.
  5-2. If there is any factor which provides any
  influence to error range of values, please tell me
  that. (For example, when xx includs, error range of
  values also
  includes.)
  .
  

Problem conclusion

• THIS MODIFICATION WILL BE INCLUDED IN
  CATIA DOCUMENTATION DELIVERED WITH
  CATIA VERSION 5 RELEASE 19.
  Additional Information:
  The documentation has been updated
  regarding error range in properties between
  design and visulization mode.
  Modified Documentation:
  Assembly Design/User Tasks/
  Displaying the Assembly Mass Properties
  The smaller the sag (3D Accuracy) is, the
  smaller will be the error range between the
  results in Visualization mode and in Design
  mode.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels