HD66227: DRAFTING (INTDRAFT):2D COMPONNENT CANNOT BE INSTANTIATED CONTON IOUSLY BY DOUBLE CLICKING

APAR status

• Closed as program error.

Error description

• DRAFTING (IntDraft):2D COMPONNENT CANNOT
  BE INSTANTIATED CONTONIOUSLY BY DOUBLE
  CLICKING
  .
  1. Create a new Drawing.
  2. Click 'New Detail Sheet'icon, and create a Detail
  Sheet.
  3. Create geometry in the Detail Sheet.
  4. Activate Sheet.1, and double-click 'Instantiate
  2D Component' icon.
  'Instantiate 2D Component'icon becomes highlight.
  5. Select '2D Component.1'on tree.
  6. Click somewhere in Sheet.1.
  '2D Component'is located.
  7. Continuously, click somewhere to locate '2D
  Component'.
  '2D component'cannot be located.
  Double Click operation is unavailable. This is a
  problem.
  .
  Additional Information:
  On R16 SP8, '2D component can be located
  continuously.
  .
  

Local fix

Problem summary

• INTERACTIVE DRAFTING / 2D COMPONNENT CANNOT BE INSTANTIATED
  CONTINIOUSLY BY DOUBLE CLICKING
  .
  DRAFTING (IntDraft):2D COMPONNENT CANNOT
  BE INSTANTIATED CONTONIOUSLY BY DOUBLE
  CLICKING
  .
  1. Create a new Drawing.
  2. Click 'New Detail Sheet'icon, and create a Detail
  Sheet.
  3. Create geometry in the Detail Sheet.
  4. Activate Sheet.1, and double-click 'Instantiate
  2D Component' icon.
  'Instantiate 2D Component'icon becomes highlight.
  5. Select '2D Component.1'on tree.
  6. Click somewhere in Sheet.1.
  '2D Component'is located.
  7. Continuously, click somewhere to locate '2D
  Component'.
  '2D component'cannot be located.
  Double Click operation is unavailable. This is a
  problem.
  .
  Additional Information:
  On R16 SP8, '2D component can be located
  continuously.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA
  VERSION 5 RELEASE 19 GA level.
  .
  ADDITIONAL INFORMATION
  .
  The problem is fixed since V5R18 SP02.
  .
  INCIDENT DIAGNOSIS
  .
  INTERACTIVE DRAFTING / 2D COMPONNENT
  CANNOT BE INSTANTIATED CONTINIOUSLY BY
  DOUBLE CLICKING .
  .
  CORRECTION EXPLANATION
  .
  The repeatable command was not working properly
  as Instantiate 2D component was not suporting
  repeating command. Now this has been fixed.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R516 PSN

     UP

• R518 PSN

     UP

• R517 PSN

     UP