HD65879: KWA: RULE - RULE IS NOT ADAPTED FOR A DIMENSION.

APAR status

• Closed as program error.

Error description

• KWA: RULE - RULE IS NOT ADAPTED FOR A
  DIMENSION.
  .
  SETTINGS:
  1. Start CATIA.
  2. Set Option 'Infrastructure'->'Part Infrastructure'-
  >'Display' ->'Display In Geometry Area' -
  Parameters of features and constraints: Active.
  .
  The contents of rule.1 are as follows.
  When String.1 is A.
  80mm:show
  60mm:active
  Line.1:show
  ?When String.1 is not A
  80mm:hide
  60mm:deactivate
  Line.1:hide
  .
  SCENARIO:
  1. Start CATIA.
  2. Open the file: 12_34.CATPart. Workbench: Part
  Design
  3. Double-click sketch.1 on a tree. WorkBench
  changes to sketcher.
  4. Click on 60mm the dimension by right-click. A
  context menu is displayed.
  5. Choose the following item: Length.6 object ->
  Add Display
  6.Click to 'Exit WorkBench'. 60mm the dimension is
  displayed on 3D.
  7. Expand parameters on a tree. And Double-click
  String.1. Edit Parameter window is open.
  8. Change a value into B. 80mm the dimension is
  displayed. This is problem.
  .
  .
  

Local fix

Problem summary

• KWA: RULE - RULE IS NOT ADAPTED FOR A DIMENSION.
  KWA: RULE - RULE IS NOT ADAPTED FOR A
  DIMENSION.
  .
  SETTINGS:
  1. Start CATIA.
  2. Set Option 'Infrastructure'->'Part Infrastructure'-
  >'Display' ->'Display In Geometry Area' -
  Parameters of features and constraints: Active.
  .
  The contents of rule.1 are as follows.
  When String.1 is A.
  80mm:show
  60mm:active
  Line.1:show
  ?When String.1 is not A
  80mm:hide
  60mm:deactivate
  Line.1:hide
  .
  SCENARIO:
  1. Start CATIA.
  2. Open the file: 12_34.CATPart. Workbench: Part
  Design
  3. Double-click sketch.1 on a tree. WorkBench
  changes to sketcher.
  4. Click on 60mm the dimension by right-click. A
  context menu is displayed.
  5. Choose the following item: Length.6 object ->
  Add Display
  6.Click to 'Exit WorkBench'. 60mm the dimension is
  displayed on 3D.
  7. Expand parameters on a tree. And Double-click
  String.1. Edit Parameter window is open.
  8. Change a value into B. 80mm the dimension is
  displayed. This is problem.
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA
  VERSION 5 RELEASE 19 GA level AND ON
  V5R18SP03.
  .
  Incident Diagnosis:
  There was no check done on the paramter
  of the constraint before making its
  visualization, whether it is made hidden or
  visible.
  .
  Correction Explanation:
  A check provided on the constraint
  parameter to see if it is set to visible then
  only make the visualization of the
  constraint.
  .
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN SP51803

     UP08/01/25 I 1000