HD65628: STCAI : ERROR MESSAGE WHEN PERFORMING A CHECK IN ON AN ASSEMBLY DRAWING, ITS CHILDREN AND THEIR RELATED DRAWINGS

APAR status

• Closed as program error.

Error description

• STCAI : Error message when performing a check
  in on an assembly drawing, its children and their
  related drawings
  .
  CATIA Smarteam integration problem reproduced
  on Smdemo
  .
  Scenario :
  An assembly is composed of 2 parts. Each of these
  3 files has a drawing.
  1. Open the provided Assembly drawing and the 2
  Part drawings.
  2. Save in Smarteam the assembly drawing. Save
  in Smarteam the 2 part drawings.
  3. In the assembly drawing, do a smarteam/check
  in. In the 'check in window', use
  'Associated objects/CATIA links/All' in order to
  display the assembly, the 2 parts and
  their 2 drawings. Click the icons on the left (for the
  6 files) in order to check in the 6 files in one
  operation. Click OK.
  4. In smarteam editor, on the assembly drawing,
  do a 'open for edit'. Use 'Associated objects/CATIA
  links/All' in order to check out the 6 files in one
  operation. Click OK.
  5. The assembly drawing is now opened in CATIA.
  In Smarteam editor, do a 'open' on each of the 2
  part drawings. The 3 drawings are now opened in
  CATIA.
  6. Make a change to each of those 3 drawings.
  Check them in Smarteam in one operation (like in
  step 3).
  Problem : error message is displayed : 'Critical
  situation...documents are not in compliance with
  documents in the disk'
  .
  

Local fix

Problem summary

• STCAI : Error message when performing a check in on an assembly
  drawing, its children and their related drawings
  STCAI : Error message when performing a check
  in on an assembly drawing, its children and their
  related drawings
  .
  CATIA Smarteam integration problem reproduced
  on Smdemo
  .
  Scenario :
  An assembly is composed of 2 parts. Each of these
  3 files has a drawing.
  1. Open the provided Assembly drawing and the 2
  Part drawings.
  2. Save in Smarteam the assembly drawing. Save
  in Smarteam the 2 part drawings.
  3. In the assembly drawing, do a smarteam/check
  in. In the 'check in window', use
  'Associated objects/CATIA links/All' in order to
  display the assembly, the 2 parts and
  their 2 drawings. Click the icons on the left (for the
  6 files) in order to check in the 6 files in one
  operation. Click OK.
  4. In smarteam editor, on the assembly drawing,
  do a 'open for edit'. Use 'Associated objects/CATIA
  links/All' in order to check out the 6 files in one
  operation. Click OK.
  5. The assembly drawing is now opened in CATIA.
  In Smarteam editor, do a 'open' on each of the 2
  part drawings. The 3 drawings are now opened in
  CATIA.
  6. Make a change to each of those 3 drawings.
  Check them in Smarteam in one operation (like in
  step 3).
  Problem : error message is displayed : 'Critical
  situation...documents are not in compliance with
  documents in the disk'
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 19 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R18SP02 AND ON V5R17SP07.
  Incident Diagnosis
  Part drawings were skipped for saving since they
  are not in the direct hierarchy of the Assembly
  drawing
  Correction Explanation
  The issue has been fixed. Those Part drawings are
  now saved.
  However, the Save time during CheckIn is
  increased since these extra saves are added.
  Note : It's still better to Save the part drawings
  explicitely before
  CheckIn the assembly if we want to Check In them
  along with
  the assembly drawing.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  SMARTEAM NT>XP

• Fixed component ID

  569199970

Applicable component levels

• R517 PSN SP51707

     UP07/10/25 I 1000