HD65362: GSD: CATIA ABEND WHEN GEOMETRICAL SET CHANGED TO ORDERED GEOMET RICALSET.

APAR status

• Closed as unreproducible in next release.

Error description

• GSD: CATIA ABEND WHEN GEOMETRICAL SET
  CHANGED TO ORDERED GEOMETRICALSET.
  .
  0) Start CATIA.
  1) Open the file: "Geometrical
  Bundle1.CATProduct". Workbench: "Generative
  Shape Design".
  2) Select "Edit" > "Search" by menu bar. "Search"
  dialog box is displayed.
  3) Select "General" tab in dialog box.
  4) Select "From Element" as "Type/Type". "Stop
  Acquisition" dialog box is displayed.
  5) Select "Ordered Geometrical Set.3" in the
  tree. "Ordered Geometrical Set" is inputted into
  an "Type/Type" selection box.
  6) Click "Search" button in dialog box. Three
  objects are discovered.
  7) Click "Select" button in dialog box.
  Three "Ordered Geometrical Set" are selected.
  8) Click MB3 on "Ordered Geometrical Set.3".
  Context menu is displayed.
  9) Select "Selected objects / Switch To Geometrical
  Set". "Ordered Geometrical Set" is not changed
  into "Geometrical Set".
  10) Select "From Element" as "Type/Type". "Stop
  Acquisition" dialog box is displayed.
  11) Select "Ordered Geometrical Set.3" in the
  tree. "Ordered Geometrical Set" is inputted into
  an "Type/Type" selection box.
  12) Click "Search" button in dialog box. Three
  objects are discovered.
  13) Click "Select" button in dialog box.
  Three "Ordered Geometrical Set" are selected.
  14) Click "OK" button in dialog box. "Search" dialog
  box is closed.
  15) Double-Click "Ordered Geometrical Set.3" in
  the tree. "Error" dialog box is displayed.
  And "Abend trace" is outputted. This is
  problem.
  .
  .
  

Local fix

Problem summary

• GSD: CATIA ABEND WHEN GEOMETRICAL SET CHANGED TO ORDERED GEOMET
  RICALSET.
  GSD: CATIA ABEND WHEN GEOMETRICAL SET
  CHANGED TO ORDERED GEOMETRICALSET.
  .
  0) Start CATIA.
  1) Open the file: "Geometrical
  Bundle1.CATProduct". Workbench: "Generative
  Shape Design".
  2) Select "Edit" > "Search" by menu bar. "Search"
  dialog box is displayed.
  3) Select "General" tab in dialog box.
  4) Select "From Element" as "Type/Type". "Stop
  Acquisition" dialog box is displayed.
  5) Select "Ordered Geometrical Set.3" in the
  tree. "Ordered Geometrical Set" is inputted into
  an "Type/Type" selection box.
  6) Click "Search" button in dialog box. Three
  objects are discovered.
  7) Click "Select" button in dialog box.
  Three "Ordered Geometrical Set" are selected.
  8) Click MB3 on "Ordered Geometrical Set.3".
  Context menu is displayed.
  9) Select "Selected objects / Switch To Geometrical
  Set". "Ordered Geometrical Set" is not changed
  into "Geometrical Set".
  10) Select "From Element" as "Type/Type". "Stop
  Acquisition" dialog box is displayed.
  11) Select "Ordered Geometrical Set.3" in the
  tree. "Ordered Geometrical Set" is inputted into
  an "Type/Type" selection box.
  12) Click "Search" button in dialog box. Three
  objects are discovered.
  13) Click "Select" button in dialog box.
  Three "Ordered Geometrical Set" are selected.
  14) Click "OK" button in dialog box. "Search" dialog
  box is closed.
  15) Double-Click "Ordered Geometrical Set.3" in
  the tree. "Error" dialog box is displayed.
  And "Abend trace" is outputted. This is
  problem.
  .
  .
  

Problem conclusion

Temporary fix

Comments

• null
  ==========*===========*==========
  THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 17.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 19 GA level AND ON
  R18 SP01
  .
  Scenario reproduce on reported R17SP03 level.
  Scenario not reproduce on above mentioned levels.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN SP51801

     UP07/10/01 I 1000