HD64958: ANALYSIS (GSA) / SELECTING THE LOAD APPLIED DOES NOT HIGHLIGHT THE FACE ON WHICH IT IS APPLIED AFTER MODIFICATION

APAR status

• Closed as Permanent restriction.

Error description

• Analysis (GSA) / Selecting the load applied does
  not highlight the face on which it is applied after
  modification
  .
  Scenario:
  1. Open the "Analysis2.CATAnalysis".
  >> Workbench is "Generative Structural Analysis
  for designer"
  2. Double click the "PART1".
  >> Workbench is "Part Design".
  3. Select the "Body.2" and select the "Assemble"
  from the contextual menu
  4. Double click the "Analysis Manager".
  >> Workbench is "Generative Structural Analysis
  for designer"
  5. Double click the "Pressure.1" in the tree.
  Problem: Selected face is not highlighted.
  .
  Expected Result:
  The edge of the selected face should be
  highlighted.
  .
  

Local fix

Problem summary

• Analysis (GSA) / Selecting the load applied does not highlight
  the face on which it is applied after modification
  Analysis (GSA) / Selecting the load applied does
  not highlight the face on which it is applied after
  modification
  .
  Scenario:
  1. Open the "Analysis2.CATAnalysis".
  >> Workbench is "Generative Structural Analysis
  for designer"
  2. Double click the "PART1".
  >> Workbench is "Part Design".
  3. Select the "Body.2" and select the "Assemble"
  from the contextual menu
  4. Double click the "Analysis Manager".
  >> Workbench is "Generative Structural Analysis
  for designer"
  5. Double click the "Pressure.1" in the tree.
  Problem: Selected face is not highlighted.
  .
  Expected Result:
  The edge of the selected face should be
  highlighted.
  .
  

Problem conclusion

• null
  ==========*===========*==========
  THIS PROBLEM IS PERMANENT RESTRICTION IN
  CATIA
  .
  Incident Diagnosis
  Problem of highlight of a face.
  Restriction Explanation
  When the user has done the selection for applying
  a pressure, he has selected the face (Face1) of the
  pad before the hole. This selection is static : the
  face selected is the face of the pads body. The hole
  modifies the face, it becomes Face2. And the face
  Face1 doesn't belong to the body of the Hole. Then
  when you select the load, nothing is highlighted,
  because the face on which the load is applied
  (Face1) doesnt belong to the Defined In Work
  Object body, it has been replaced by Face2. Cf
  publications that have the same behaviour.
  By-Pass
  Put the Pad as Defined In Work Object, and the
  face will be highlighted.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels