HD63822: ERR203 3DCOM CREATE OBJECT PART WITH DOC LEADS TO ERROR

APAR status

• Closed as program error.

Error description

• 3DCOM Create Object Part with Doc leads
  to error
  1. Start 3DCom.
  2.Create a new PART Assembly in VPMENV-
  Environment and bookmark it in a workbook.
  3. Start CATIA V5.
  4. Create a new Part with File -> New -> Part.
  5. Create a cuboid.
  6. Switch to 3DCom in workbook VPM Web Access
  and create a new VPM-PART with DOCUMENT in
  VPMENV.
  7. Copy the PART and paste it under the Assembly-
  PART in the workbook.
  8. Switch to CATIA V5.
  9. Close the CATPart.
  10. Create a new Part with File -> New -> Part.
  11. Create a cylinder.
  12. Switch to 3DCom in workbook VPM Web Access
  and create a new VPM-PART with DOCUMENT in
  VPMENV.
  13. Copy the PART and paste it under the
  Assembly-PART in the workbook.
  14. Rightclick on Assembly-PART  Commit
  modification Select all/Save.
  15. Switch to CATIA V5.
  16. Close the CATPart.
  17. Switch to 3DCom.
  18. Load both Documents into CATIA V5 with Open
  in a new CATIA V5 Product.
  19. Switch to CATIA V5.
  20. Activate a CATPart (e.g. the cylinder).
  21. Switch to 3DCom in the workbook VPM Web
  Access.
  22. Doubleclick Create Object and create a PART
  with DOCUMENT in VPMENV (Source = CATIA V5).
  .
  RESULT:The CATPart will be associated, but you
  get an error message in CATIA V5 as "Attempt to
  access some data from the database CATPart
  Internal Error ".
  .
  

Local fix

Problem summary

• 3DCOM Create Object Part with Doc leads to error.
  3DCOM Create Object Part with Doc leads
  to error
  1. Start 3DCom.
  2.Create a new PART Assembly in VPMENV-
  Environment and bookmark it in a workbook.
  3. Start CATIA V5.
  4. Create a new Part with File -> New -> Part.
  5. Create a cuboid.
  6. Switch to 3DCom in workbook VPM Web Access
  and create a new VPM-PART with DOCUMENT in
  VPMENV.
  7. Copy the PART and paste it under the Assembly-
  PART in the workbook.
  8. Switch to CATIA V5.
  9. Close the CATPart.
  10. Create a new Part with File -> New -> Part.
  11. Create a cylinder.
  12. Switch to 3DCom in workbook VPM Web Access
  and create a new VPM-PART with DOCUMENT in
  VPMENV.
  13. Copy the PART and paste it under the
  Assembly-PART in the workbook.
  14. Rightclick on Assembly-PART  Commit
  modification Select all/Save.
  15. Switch to CATIA V5.
  16. Close the CATPart.
  17. Switch to 3DCom.
  18. Load both Documents into CATIA V5 with Open
  in a new CATIA V5 Product.
  19. Switch to CATIA V5.
  20. Activate a CATPart (e.g. the cylinder).
  21. Switch to 3DCom in the workbook VPM Web
  Access.
  22. Doubleclick Create Object and create a PART
  with DOCUMENT in VPMENV (Source = CATIA V5).
  .
  RESULT:The CATPart will be associated, but you
  get an error message in CATIA V5 as "Attempt to
  access some data from the database CATPart
  Internal Error ".
  .
  

Problem conclusion

• null
  ==========*===========*==========
  THIS PROBLEM WILL BE FIXED ON ENOVIA
  VERSION 5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R17SP06.
  Incident Diagnosis
  3DCOM Create Object Part with Doc leads
  to error
  Correction Explanation
  The server name extracted was not correct as the
  storage name retrieved contained the file path. So
  change done so as to set the _where to zero in
  case it contains the file path.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  ENOVIA 3D-COM N

• Fixed component ID

  569151600

Applicable component levels

• R517 PSN SP51706

     UP07/06/28 I 1000