HD63513: NC REVIEW / MACHINING PROCESS INSTANTIATION FAILS

APAR status

• Closed as program error.

Error description

• NC REVIEW / MACHINING PROCESS
  INSTANTIATION FAILS
  .
  Scenario
  .
  1. install the supplied catalog file in the
  intel_a\startup\Manufacturing\Tools library
  2. Open the Counterdrilled.CATProcess in Catia
  PMG
  3. Open the Manufacturing View, sort by machining
  features and find the
  counterdrilled hole
  4. Select the Machining Processes Instantiation
  5. Select the counterdrilled hole as feature Select
  the
  ExpansionHoles.catalog as catalog, and select the
  EXP10 from the
  Machining Processes List as process to instatiate
  6. Select OK.
  - warning Check execution has failed.
  7. Now there is a warning popping up on the
  screen. That the
  Counterbore diameter cannot be used.
  8. Select OK to the warning
  9. Doubleclick on the Machineable Axial Feature.1
  in the manufacturing
  View
  10. Observe that there is a parameter called
  Counterbore diameter.
  11. Now open the Expansionholes.CATProcess
  12. Open the machining Process View
  13. Rightclick on the EXP10 in the tree, and select
  edit Checks.
  14. There is a check on the Counterbore diameter
  but this is not working
  .
  

Local fix

Problem summary

• NC REVIEW / MACHINING PROCESS INSTANTIATION FAILS
  NC REVIEW / MACHINING PROCESS
  INSTANTIATION FAILS
  .
  Scenario
  .
  1. install the supplied catalog file in the
  intel_a\startup\Manufacturing\Tools library
  2. Open the Counterdrilled.CATProcess in Catia
  PMG
  3. Open the Manufacturing View, sort by machining
  features and find the
  counterdrilled hole
  4. Select the Machining Processes Instantiation
  5. Select the counterdrilled hole as feature Select
  the
  ExpansionHoles.catalog as catalog, and select the
  EXP10 from the
  Machining Processes List as process to instatiate
  6. Select OK.
  - warning Check execution has failed.
  7. Now there is a warning popping up on the
  screen. That the
  Counterbore diameter cannot be used.
  8. Select OK to the warning
  9. Doubleclick on the Machineable Axial Feature.1
  in the manufacturing
  View
  10. Observe that there is a parameter called
  Counterbore diameter.
  11. Now open the Expansionholes.CATProcess
  12. Open the machining Process View
  13. Rightclick on the EXP10 in the tree, and select
  edit Checks.
  14. There is a check on the Counterbore diameter
  but this is not working
  .
  

Problem conclusion

• null
  ==========*===========*==========
  THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R17SP06.
  .
  Now,the parameters for CounterDrill is
  exposed to the user on R17 level onwards too.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R517 PSN SP51706

     UP07/06/28 I 1000