HD63288: FSS : THE BALLOON OF CURVATURE CONTINUITY IS NOT DISPLAYED

APAR status

• Closed as program error.

Error description

• FSS : THE BALLOON OF CURVATURE CONTINUITY
  IS NOT DISPLAYED
  .
  Scenario:
  1. Open the file : T9447.CATPart. Workbench :
  Free style.
  2. Double-click 3D Curve.2 (Blue curve) =>The
  balloon of point continuity is displayed.
  3. Click the balloon of Point on the geometry area
  by MB3.
  4. Select Tangent continuity by context menu.
  =>The balloon of tangent continuity is displayed.
  5. Click the balloon of Tangent on the geometry
  area by MB3.
  6. Select Curvature continuity by context menu.
  =>The balloon of curvature continuity is not
  displayed. >>>This is problem.
  < Result >
  The balloon of curvature continuity is not displayed
  when 3D Curve is edited. >>>This is problem.
  < Result to expect >
  The balloon of curvature continuity should be
  displayed as well as R16SP2 when 3D Curve is
  edited.
  < Remark >
  - This behavior occurs also in Japanese
  environment.
  - This problem is regression of R16SP2. But
  geometry was changed to curvature continuity.
  .
  .
  

Local fix

Problem summary

• FSS : THE BALLOON OF CURVATURE CONTINUITY IS NOT DISPLAYED
  .
  Scenario:
  1. Open the file : T9447.CATPart. Workbench :
  Free style.
  2. Double-click 3D Curve.2 (Blue curve) =>The
  balloon of point continuity is displayed.
  3. Click the balloon of Point on the geometry area
  by MB3.
  4. Select Tangent continuity by context menu.
  =>The balloon of tangent continuity is displayed.
  5. Click the balloon of Tangent on the geometry
  area by MB3.
  6. Select Curvature continuity by context menu.
  =>The balloon of curvature continuity is not
  displayed. >>>This is problem.
  < Result >
  The balloon of curvature continuity is not displayed
  when 3D Curve is edited. >>>This is problem.
  < Result to expect >
  The balloon of curvature continuity should be
  displayed as well as R16SP2 when 3D Curve is
  edited.
  < Remark >
  - This behavior occurs also in Japanese
  environment.
  - This problem is regression of R16SP2. But
  geometry was changed to curvature continuity.
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  .
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R17SP06.
  .
  Incident Diagnosis
  ADue ti regression , introduced an error
  when retrieving the NLS text of the continuity
  manipulator in the case of curvature continuity. The
  retrieved text was empty whereas it should not.
  Correction Explanation
  Algorithm corrected so that the retrieved text is
  correct.
  .
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN

     UP