HD62268: MACHINING (AMG) / MACHINE ROTATION : SOME OF THE INSTRUCTION AR E WRONG

APAR status

• Closed as program error.

Error description

• Machining (AMG) / Machine Rotation : Some of the
  instruction are wrong
  .
  SCENARIO
  .
  Open the CATProcess
  Replay the toolpath for the first machining program.
  During the calculation of transition paths, some
  machine rotation instructions are missing.
  Some times, the rotation instruction is correctly
  generated but the tool axis vector is not correct,
  the tool axis should always be (0,0,1).
  .
  PROBLEM
  .
  Some machine rotation instructions are wrong
  generated
  .
  EXPECTED RESULT
  .
  Machine rotation instructions should be correctly
  generated
  .
  .
  

Local fix

Problem summary

• Machining (AMG) / Machine Rotation : Some of the instruction ar
  e wrong
  Machining (AMG) / Machine Rotation : Some of the
  instruction are wrong
  .
  SCENARIO
  .
  Open the CATProcess
  Replay the toolpath for the first machining program.
  During the calculation of transition paths, some
  machine rotation instructions are missing.
  Some times, the rotation instruction is correctly
  generated but the tool axis vector is not correct,
  the tool axis should always be (0,0,1).
  .
  PROBLEM
  .
  Some machine rotation instructions are wrong
  generated
  .
  EXPECTED RESULT
  .
  Machine rotation instructions should be correctly
  generated
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R17SP05.
  .
  Incident Diagnosis :
  Earlier it was trying to get the transition
  path for very small rotation(neglegible) also and
  getting failed.
  .
  Correction Explanation :
  Now the it has been changed to take into
  acccount the very small rotation(neglegible)
  appropriately.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R516 PSN

     UP

• R517 PSN SP51705

     UP07/05/04 I 1000