HD62178: PART : MEASRUE : RESULT OF MEASURE BETWEEN 2 SURFACES BY FORMUL A BECOME UNSET

APAR status

• Closed as program error.

Error description

• PART : MEASRUE : RESULT OF MEASURE BETWEEN
  2 SURFACES BY FORMULA BECOME UNSET
  .
  SCENARIO:
  1. Open Supplied CATPart.
  2. Select "Measure Between" icon. Measure
  Between dialog box appears
  3. Select Surface "a" and then surface ﾨSurface.2ﾨ
  from specification tree
  .
  OBSERVATION1:
  Length measured is "1.056 mm"
  .
  4. Select "Formula" icon. Formulas dialog box
  appears.
  5. Select new parameter type as length and click
  on create new parameter button. Length.1
  parameter is created.
  6. Select Length.1 and click "Add Formula" button.
  Formula editor dialog box appears.
  7. Select Measures from dictionary field.
  8. Select Distance (Body, Body): Length option
  from members of measure field.
  9. Select Surface "a" and then surface ﾨSurface.2ﾨ
  from specification tree.
  10. Click OK to Formula editor dialog box.
  Automatic update warning message is displayed.
  11. Click YES to Automatic update warning
  message.
  .
  OBSERVATION2:
  Evaluation error in formula message is displayed.
  On clicking OK to this error message the measure
  result is set to unset.
  .
  

Local fix

Problem summary

• PART : MEASRUE : RESULT OF MEASURE BETWEEN 2 SURFACES BY FORMUL
  A BECOME UNSET
  PART : MEASRUE : RESULT OF MEASURE BETWEEN
  2 SURFACES BY FORMULA BECOME UNSET
  .
  SCENARIO:
  1. Open Supplied CATPart.
  2. Select "Measure Between" icon. Measure
  Between dialog box appears
  3. Select Surface "a" and then surface  Surface.2
  from specification tree
  .
  OBSERVATION1:
  Length measured is "1.056 mm"
  .
  4. Select "Formula" icon. Formulas dialog box
  appears.
  5. Select new parameter type as length and click
  on create new parameter button. Length.1
  parameter is created.
  6. Select Length.1 and click "Add Formula" button.
  Formula editor dialog box appears.
  7. Select Measures from dictionary field.
  8. Select Distance (Body, Body): Length option
  from members of measure field.
  9. Select Surface "a" and then surface  Surface.2
  from specification tree.
  10. Click OK to Formula editor dialog box.
  Automatic update warning message is displayed.
  11. Click YES to Automatic update warning
  message.
  .
  OBSERVATION2:
  Evaluation error in formula message is displayed.
  On clicking OK to this error message the measure
  result is set to unset.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R17SP06
  .
  Incident Diagnosis
  Measure formula gives wrong result
  .
  Correction Explanation
  Correction done
  .
  Answer and By-Pass
  None
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R516 PSN

     UP

• R517 PSN SP51706

     UP07/06/28 I 1000