HD61627: PART: MULTISECTION SOLID - UPDATE ERROR OCCURS DURING MULTI SEC TIONS SOLID OPERATION.

APAR status

• Closed as program error.

Error description

• PART: MULTISECTION SOLID - UPDATE ERROR
  OCCURS DURING MULTI SECTIONS SOLID
  OPERATION.
  .
  SCENARIO:
  1. Open the sample.CATPart.
  2. Click Multi-sections Solid icon.
  3. Select Sketch.2, Sketch.3 and Sketch.4
  4. Enable Deviation and input 0.005 mm.
  5. Click OK button. Update Error occurs. Multi-
  sections Solid.1 Invalid, empty or missing input
  element One mandatory input element is invalid,
  empty or missing There is no solution for this
  operation.
  This is the problem.
  .
  .
  

Local fix

Problem summary

• PART: MULTISECTION SOLID - UPDATE ERROR OCCURS DURING MULTI SEC
  TIONS SOLID OPERATION.
  PART: MULTISECTION SOLID - UPDATE ERROR
  OCCURS DURING MULTI SECTIONS SOLID
  OPERATION.
  .
  SCENARIO:
  1. Open the sample.CATPart.
  2. Click Multi-sections Solid icon.
  3. Select Sketch.2, Sketch.3 and Sketch.4
  4. Enable Deviation and input 0.005 mm.
  5. Click OK button. Update Error occurs. Multi-
  sections Solid.1 Invalid, empty or missing input
  element One mandatory input element is invalid,
  empty or missing There is no solution for this
  operation.
  This is the problem.
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R17SP05.
  .
  ADDITIONAL INFORMATION:
  The multi-section solid can be created correctly at
  0.005mm deviation also.
  .
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R517 PSN SP51705

     UP07/05/04 I 1000