HD61572: SMD: IMPOSSIBLE TO MODIFY A SPECIFIC SKETCH WITH ERROR.

APAR status

• Closed as unreproducible in next release.

Error description

• SMD: IMPOSSIBLE TO MODIFY A SPECIFIC
  SKETCH WITH ERROR.
  .
  SCENARIO:
  1. Open the part.
  2. Edit sketch.1 to set a larger value to the
  distance.6 (for instance 485mm).
  3. Get out of the sketch: an error message is
  displayed. This is the problem. Error is as follows:
  ActivateAndTestOwnership(...) : cell does not
  belong to body. Cell Body_2068909 does not
  belong to body . The requested operation cannot
  be performed. Modify the input selection.
  .
  .
  

Local fix

Problem summary

• SMD: IMPOSSIBLE TO MODIFY A SPECIFIC SKETCH WITH ERROR.
  SMD: IMPOSSIBLE TO MODIFY A SPECIFIC
  SKETCH WITH ERROR.
  .
  SCENARIO:
  1. Open the part.
  2. Edit sketch.1 to set a larger value to the
  distance.6 (for instance 485mm).
  3. Get out of the sketch: an error message is
  displayed. This is the problem. Error is as follows:
  ActivateAndTestOwnership(...) : cell does not
  belong to body. Cell Body_2068909 does not
  belong to body . The requested operation cannot
  be performed. Modify the input selection.
  .
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 16.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 18 GA level AND ON
  V5R17SP04.
  .
  Incident Diagnosis:
  SMD: IMPOSSIBLE TO MODIFY A SPECIFIC
  SKETCH WITH ERROR.
  .
  Reason:
  The correction is versioned, the cylindrical
  bend.5 must be recreated with same values.
  Note that the problem cannot be fixed on R16 level
  because of huge impacts to the code.
  .
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• APPLICABLE517 PONENT LEVEL/SU:

     

• R516 PSN

     UP

• R517 PSN SP51704

     UP07/02/27 I 1000