HD60771: PART : EDGE FILLET - TOPOLOGY OR GEOMETRY TOO COMPLEX

APAR status

• Closed as program error.

Error description

• PART : EDGE FILLET - TOPOLOGY OR GEOMETRY
  TOO COMPLEX
  .
  Scenario:
  1. Open CATPart and go to Part Design WB.
  2. Click Fillet icon and select Edge.
  3. Input 10mm as Radius.
  4. Define Tangency as Propagation.
  5. Click OK.
  6. Update error is displayed below.
  - Impossible relimitation. The local topology or
  geometry is too complex
  .
  

Local fix

Problem summary

• PART : EDGE FILLET - TOPOLOGY OR GEOMETRY TOO COMPLEX
  PART : EDGE FILLET - TOPOLOGY OR GEOMETRY
  TOO COMPLEX
  .
  Scenario:
  1. Open CATPart and go to Part Design WB.
  2. Click Fillet icon and select Edge.
  3. Input 10mm as Radius.
  4. Define Tangency as Propagation.
  5. Click OK.
  6. Update error is displayed below.
  - Impossible relimitation. The local topology or
  geometry is too complex
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  Incident Diagnosis
  Fillet Relimitation failed
  Correction Explanation
  Fillet Relimitation has been enhanced
  Answer and By-Pass
  None
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN

     UP