HD60565: MACHINING (3ASMG) / SWEEPING / MAXIMUM DESCRETIZATION : INCORRE CT TOOLPATH GENERATED

APAR status

• Closed as unreproducible in next release.

Error description

• Machining (3ASMG) / SWEEPING / MAXIMUM
  DESCRETIZATION : INCORRECT TOOLPATH
  GENERATED
  .
  SCENARIO
  .
  Open the CATProcess.
  Compute the toolpath of the cycle "Plan parall le.3"
  Look at the result, sometimes the toolpath is not
  proper Between the plane and the fillet
  If you remove the option "max Discretization" of
  the strategy tab the result is OK
  .
  PROBLEM
  .
  Toolpath is not correctly generated for a sweeping
  operation when a Max Discretization is defined.
  .
  EXPECTED RESULT
  .
  Correct toolpath should be generated for a
  sweeping operation when a Max Discretization is
  defined..
  .
  

Local fix

Problem summary

• Machining (3ASMG) / SWEEPING / MAXIMUM DESCRETIZATION : INCORRE
  CT TOOLPATH GENERATED
  Machining (3ASMG) / SWEEPING / MAXIMUM
  DESCRETIZATION : INCORRECT TOOLPATH
  GENERATED
  .
  SCENARIO
  .
  Open the CATProcess.
  Compute the toolpath of the cycle "Plan parall le.3"
  Look at the result, sometimes the toolpath is not
  proper Between the plane and the fillet
  If you remove the option "max Discretization" of
  the strategy tab the result is OK
  .
  PROBLEM
  .
  Toolpath is not correctly generated for a sweeping
  operation when a Max Discretization is defined.
  .
  EXPECTED RESULT
  .
  Correct toolpath should be generated for a
  sweeping operation when a Max Discretization is
  defined..
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 17.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 18 GA level AND ON
  V5R17SP04
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R517 PSN

     UP