HD59916: COMPOSITES ( COMPODSG ) : FLATTENING GENERATES REVERSED SUB PLI ES.

APAR status

• Closed as program error.

Error description

• Composites ( CompoDsg ) : Flattening generates
  reversed sub plies.
  .
  SCENARIO:
  1- Open the provided CATPart
  2- Select 3DMultiSplice function :
  - select Ply.50
  - select Splicing curves
  3- Select Producibility function and apply it for each
  Cut Piece.
  4- Select Flattening function and apply it to the
  CutPieces.
  PROBLEM:
  Sub-plies seems to be reversed
  .
  

Local fix

Problem summary

• Composites ( CompoDsg ) : Flattening generates reversed sub pli
  es.
  Composites ( CompoDsg ) : Flattening generates
  reversed sub plies.
  .
  SCENARIO:
  1- Open the provided CATPart
  2- Select 3DMultiSplice function :
  - select Ply.50
  - select Splicing curves
  3- Select Producibility function and apply it for each
  Cut Piece.
  4- Select Flattening function and apply it to the
  CutPieces.
  PROBLEM:
  Sub-plies seems to be reversed
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R16SP09 AND ON V5R17SP05.
  Incident Diagnosis
  Invertion of Flatten plies. Some of the Cut Pieces
  are found to be having inverted flatten shapes.
  Correction Explanation
  A normal is calculated by given a point and given a
  surface. Suppose the point is on the edge, the
  normal is calculated incorrectly. Now, the issue is,
  by computing the normal for a slightly interior
  point, when given the edge point and the edge
  domain.
  Answer and By-Pass
  NONE
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R516 PSN

     UP

• R517 PSN SP51705

     UP07/05/04 I 1000