HD59581: PDG : MEASURE BETWEEN : THE ORIENTATION OF THE ANGLE QUADERANT IS CHANGED AFTER MODIFYING THE PARAMETER

APAR status

• Closed as unreproducible in next release.

Error description

• PDG : MEASURE BETWEEN : THE ORIENTATION OF
  THE ANGLE QUADERANT IS CHANGED AFTER
  MODIFYING THE PARAMETER
  .
  SCENARIO:
  1. Start CATIA and click on Tools menu and select
  options command. Options dialog box appears.
  2. Go to Parameters and Measure ﾨ Knowledge tab
  page.
  3. Check ON the option with value and with formula.
  4. Go to Parameters and Measure ﾨ Measure tool
  tab page.
  5. Check ON option Automatic Update in Part and
  Automatic Update in product option.
  6. Go to infrastructure ﾨ Part infrastructure ﾨ
  display tab page.
  7. Check ON option Parameters, Constraints and
  Relations.
  8. Click OK to options dialog box.
  9. Open TEST_SAMPLE_061121.CATPart.
  .
  OBSERVATION1:
  The angle value is 5.001 degrees..
  .
  10. Expand Parameter node in specification tree.
  11. Double click on ﾨSet_Param_01ﾨ. Edit
  parameter dialog box appears.
  12. Change the value to 500.
  13. Click OK to Edit parameter dialog box.
  .
  OBSERVATION2:
  The angle value is changed to 354.999 degrees
  .
  

Local fix

Problem summary

• PDG : MEASURE BETWEEN : THE ORIENTATION OF THE ANGLE QUADERANT
  IS CHANGED AFTER MODIFYING THE PARAMETER
  PDG : MEASURE BETWEEN : THE ORIENTATION OF
  THE ANGLE QUADERANT IS CHANGED AFTER
  MODIFYING THE PARAMETER
  .
  SCENARIO:
  1. Start CATIA and click on Tools menu and select
  options command. Options dialog box appears.
  2. Go to Parameters and Measure   Knowledge tab
  page.
  3. Check ON the option with value and with formula.
  4. Go to Parameters and Measure   Measure tool
  tab page.
  5. Check ON option Automatic Update in Part and
  Automatic Update in product option.
  6. Go to infrastructure   Part infrastructure
  display tab page.
  7. Check ON option Parameters, Constraints and
  Relations.
  8. Click OK to options dialog box.
  9. Open TEST_SAMPLE_061121.CATPart.
  .
  OBSERVATION1:
  The angle value is 5.001 degrees..
  .
  10. Expand Parameter node in specification tree.
  11. Double click on  Set_Param_01 . Edit
  parameter dialog box appears.
  12. Change the value to 500.
  13. Click OK to Edit parameter dialog box.
  .
  OBSERVATION2:
  The angle value is changed to 354.999 degrees
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 16.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 18 GA level
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN

     UP