HD58662: PDG \ DESIGN TABLE \ ASSOCIATION LOST WHEN ANGLE UNIT IS MODIFI ED

APAR status

• Closed as program error.

Error description

• PDG \ DESIGN TABLE \ ASSOCIATION LOST WHEN
  ANGLE UNIT IS MODIFIED.
  .
  0.Start CATIA.
  1.Open the attached CATPart.
  2.Change Angle unit from Deg to
  DegreeMinutSecond in Tools  Options  General
  Parameters and Measure Units TAB.
  3.Select Design Table icon
  4.Check Create a design table with current
  parameter values in Creation of a Design Table
  dialog box.
  5.Push OK button.
  6.Select PartBody Sketch.1 Angle.2 Angle
  in Select parameters to insert panel .
  7.Adds the selected parameters in the design table
  8.Push OK button.
  9.Key-in HGA468 as File name in
  Select the Pathname of the File to be created
  panel.
  10.Push OK button.
  11.Confirm DesignTable.1 active.configuration
  row:1 panel.
  12.Push Edit table button.
  13.Key-in 60 in A3 CELL (HGA468.xls)
  14.Over write HGA468.xls .
  15.Close excel file.
  16.Confirm Knowledge Report panel.
  17.Push Close button.
  18.No associations between columns of the design
  table and parameters.
  -This is the problem.
  .
  

Local fix

Problem summary

• PDG \ DESIGN TABLE \ ASSOCIATION LOST WHEN ANGLE UNIT IS MODIFI
  ED
  PDG \ DESIGN TABLE \ ASSOCIATION LOST WHEN
  ANGLE UNIT IS MODIFIED.
  .
  0.Start CATIA.
  1.Open the attached CATPart.
  2.Change Angle unit from Deg to
  DegreeMinutSecond in Tools  Options  General
  Parameters and Measure Units TAB.
  3.Select Design Table icon
  4.Check Create a design table with current
  parameter values in Creation of a Design Table
  dialog box.
  5.Push OK button.
  6.Select PartBody Sketch.1 Angle.2 Angle
  in Select parameters to insert panel .
  7.Adds the selected parameters in the design table
  8.Push OK button.
  9.Key-in HGA468 as File name in
  Select the Pathname of the File to be created
  panel.
  10.Push OK button.
  11.Confirm DesignTable.1 active.configuration
  row:1 panel.
  12.Push Edit table button.
  13.Key-in 60 in A3 CELL (HGA468.xls)
  14.Over write HGA468.xls .
  15.Close excel file.
  16.Confirm Knowledge Report panel.
  17.Push Close button.
  18.No associations between columns of the design
  table and parameters.
  -This is the problem.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R17SP04 AND ALSO ON V5R16SP09.
  .
  Additional Information
  .
  The Design table is correctly synchronised now.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R516 PSN

     UP

• R517 PSN

     UP