HD57405: PART OF SOLID DISAPPEARS WHEN A SHEET WALL IS CHANGED IN A SPEC IFIC CATPART

APAR status

• Closed as documentation error.

Error description

• PART OF SOLID DISAPPEARS WHEN A SHEET WALL
  IS CHANGED IN A SPECIFIC CATPART
  .
  SCENARIO:
  SCENARIO:
  1.Open Part1.CATPart
  2.Change to Generative Sheet metal Design if
  needed
  3.Select Insert/Recognize
  4.Select the plane face as Reference face and set
  Full recognition, then select OK.
  ==== Solid part is gone. This is the trouble
  .
  

Local fix

Problem summary

• PART OF SOLID DISAPPEARS WHEN A SHEET WALL IS CHANGED IN A SPEC
  IFIC CATPART
  PART OF SOLID DISAPPEARS WHEN A SHEET WALL
  IS CHANGED IN A SPECIFIC CATPART
  .
  SCENARIO:
  SCENARIO:
  1.Open Part1.CATPart
  2.Change to Generative Sheet metal Design if
  needed
  3.Select Insert/Recognize
  4.Select the plane face as Reference face and set
  Full recognition, then select OK.
  ==== Solid part is gone. This is the trouble
  .
  

Problem conclusion

• THIS MODIFICATION WILL BE INCLUDED IN CATIA
  DOCUMENTATION DELIVERED WITH CATIA
  VERSION 5 RELEASE 18
  .
  ADDITIONAL INFORMATION:
  This modification is also included in the
  Documentation of V5R17 SP04
  .
  Generative Sheetmetal Design -
  User tasks -
  Recognizing Features From an Existing Part -
  .
  MODIFICATION:
  Important: Walls and cylindrical bends only can be
  recognized. Hems are recognized as walls
  .
  Important Information
  This not a wall nor a Cylidrical Bend or Hem. So it
  is not recognized
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels