HD56605: NVG / VIDEO REPLAY FAILS WITH IMPROPER STOCK GEOMETRY WASRNING

APAR status

• Closed as unreproducible in next release.

Error description

• NVG / VIDEO REPLAY FAILS WITH IMPROPER
  STOCK GEOMETRY WASRNING
  .
  1. Open the attached (ms544010.CATProcess)
  CATProcess.
  2. Expand the specification tree to machining
  operations.
  3. Under Tool change.8, Profile contouring.12
  operation is defined.
  4. From the contextual menu on this operation,
  select Run Full Video.
  5. It can be observed that the Video replay fails
  with Warning, An unexpected malfunction has
  occurred. Improper stock geometry.
  .
  .
  

Local fix

Problem summary

• NVG / VIDEO REPLAY FAILS WITH IMPROPER STOCK GEOMETRY WASRNING
  NVG / VIDEO REPLAY FAILS WITH IMPROPER
  STOCK GEOMETRY WASRNING
  .
  1. Open the attached (ms544010.CATProcess)
  CATProcess.
  2. Expand the specification tree to machining
  operations.
  3. Under Tool change.8, Profile contouring.12
  operation is defined.
  4. From the contextual menu on this operation,
  select Run Full Video.
  5. It can be observed that the Video replay fails
  with Warning, An unexpected malfunction has
  occurred. Improper stock geometry.
  .
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 16.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 18 GA level AND ON
  V5R17SP02 AND V5R16SP08.
  .
  This problem was reproduced on the reported level
  R16 SP05.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Modules/Macros

•    NONE                            517
  

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R516 PSN

     UP

• R517 PSN SP51702

     UP06/10/24 I 1000