HD56527: DRAWING PROJECTION OF PARABOLA, HYPERBOLA AND CONIC ARE NOT CRE ATED

APAR status

• Closed as program error.

Error description

• DRAWING PROJECTION OF PARABOLA,
  HYPERBOLA AND CONIC ARE NOT CREATED
  .
  Scenario
  0.Tools/Options/Drafting/View tab
  Project 3D wireframe -- On
  1.File/Open (Part1.CATPart)
  2.Start/Mechanical Design / Drafting
  -->Drawing created
  3.Sel Front View icon
  4.Window / Part1.CATPart is chosen
  5.yz plane is chosen
  ==>The projection of Parabola and
  Hyperbola,Conic are not created.
  .
  

Local fix

Problem summary

• DRAWING PROJECTION OF PARABOLA, HYPERBOLA AND CONIC ARE NOT CRE
  ATED
  DRAWING PROJECTION OF PARABOLA,
  HYPERBOLA AND CONIC ARE NOT CREATED
  .
  Scenario
  0.Tools/Options/Drafting/View tab
  Project 3D wireframe -- On
  1.File/Open (Part1.CATPart)
  2.Start/Mechanical Design / Drafting
  -->Drawing created
  3.Sel Front View icon
  4.Window / Part1.CATPart is chosen
  5.yz plane is chosen
  ==>The projection of Parabola and
  Hyperbola,Conic are not created.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  .
  Incident Diagnosis
  DRAWING PROJECTION OF PARABOLA,
  HYPERBOLA AND CONIC ARE NOT CREATED
  .
  Correction Explanation
  Architecture error in the adhesion of these objects
  .
  Answer and By-Pass
  None
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN

     UP