HD56225: DMUNAV :MIGRATE V4 TO V5 RESULTS IN ABEND AND EMPTY

APAR status

• Closed as program error.

Error description

• DMUNAV :MIGRATE V4 To V5 RESULTS IN ABEND
  AND EMPTY PRODUCT AND PARTS.
  SCENARIO:
  1) USE ONLY A "DM1.slt+SP1" INSTALLATION AND
  LICENSE and Default CATSettings.
  2) Start ENOVIA DMU Navigator.
  3) Select "Tools - Utility" from the pull-down menu.
  4) Select the "ExtractModelFromSequential" utility
  from the "Batch Monitor" window.
  5) Browse to select the provided, "Test.exp" file
  and declare a targetdirectory for the result.
  6) Select the "Licensing Setup" button and verify
  you are using only a DM1+SP1 license, then select
  Run.
  7) The file, "Test￱SPACE￱AND￱DRAW.model", is
  correctly extracted.
  8) Close the "Extract ModelFrom Sequential"
  window by selecting Cancel.
  9) Select the "MigrateV4toV5" utility from
  the "Batch Monitor" window.
  10) Browse to select the .model file from Step 6
  and declare a target directory for the results.
  11) Select the "Licensing Setup" button and verify
  you are using only a DM1+SP1 license, then select
  Run.
  .
  RESULT:
  - The process appears to have run correctly, but an
  AbendTrace file is created in CATTemp. A CATPart,
  CATDrawing and mmf file are created.
  - When you open the resulting CATPart or
  CATDrawing there is no geometry in the files. They
  are empty.
  .
  

Local fix

Problem summary

• DMUNAV :MIGRATE V4 To V5 RESULTS IN ABEND AND EMPTY
  PRODUCT AND PARTS.
  DMUNAV :MIGRATE V4 To V5 RESULTS IN ABEND
  AND EMPTY PRODUCT AND PARTS.
  SCENARIO:
  1) USE ONLY A "DM1.slt+SP1" INSTALLATION AND
  LICENSE and Default CATSettings.
  2) Start ENOVIA DMU Navigator.
  3) Select "Tools - Utility" from the pull-down menu.
  4) Select the "ExtractModelFromSequential" utility
  from the "Batch Monitor" window.
  5) Browse to select the provided, "Test.exp" file
  and declare a targetdirectory for the result.
  6) Select the "Licensing Setup" button and verify
  you are using only a DM1+SP1 license, then select
  Run.
  7) The file, "Test?SPACE?AND?DRAW.model", is
  correctly extracted.
  8) Close the "Extract ModelFrom Sequential"
  window by selecting Cancel.
  9) Select the "MigrateV4toV5" utility from
  the "Batch Monitor" window.
  10) Browse to select the .model file from Step 6
  and declare a target directory for the results.
  11) Select the "Licensing Setup" button and verify
  you are using only a DM1+SP1 license, then select
  Run.
  .
  RESULT:
  - The process appears to have run correctly, but an
  AbendTrace file is created in CATTemp. A CATPart,
  CATDrawing and mmf file are created.
  - When you open the resulting CATPart or
  CATDrawing there is no geometry in the files. They
  are empty.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA
  VERSION 5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE
  FIXED ON V5R17SP02 AND ALSO ON
  V5R16SP08.
  .
  Incident Diagnosis:
  DMUNAV :MIGRATE V4 To V5 RESULTS IN
  ABEND
  AND EMPTY PRODUCT AND PARTS.
  .
  Correction Explanation:
  With DM1 licnece it is not possible to use
  the Batch.
  Please use the V4I license to get the
  desired
  results.
  .
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  ENOVIA DMU NT>X

• Fixed component ID

  569151800

Applicable component levels

• R516 PSN

     UP

• R517 PSN

     UP

• R518 PSN

     UP