HD55391: STCAI : TREE ICON OF CGR CHECKED IN IS NOT CORRECT.

APAR status

• Closed as program error.

Error description

• STCAI : Tree icon of CGR checked in is not correct.
  .
  SCENARIO:
  0. Set 'CATIA.ExposeMode=NO' in System
  Configuration Editor.
  1. Start CATIAV5R16SP05.
  2. Create new CATPart file.
  3. Create a pad model and select File / Save As.
  4. Save this file in cgr.
  5. Close CATPart file.
  6. Create new CATProduct and insert some sub
  elements.
  7. Insert the previous saved cgr using 'Insert
  Existing Component' icon.
  8. Select SmarTeam / Connect.
  9. Save this product file by SmarTeam / Save
  command.
  10. Check in product file by SmarTeam / Life
  cycle / Check in command.
  11. Select checked in product file and click MB3.
  12. Select File Operation / Open.
  =>Product file is opened with read only.
  PROBLEM:
  Tree icon of CGR is not correct.
  13. Select SmarTeam / Tools / Refresh.
  PROBLEM:
  Error message is displayed.
  .
  

Local fix

Problem summary

• STCAI : Tree icon of CGR checked in is not correct.
  .
  SCENARIO:
  0. Set 'CATIA.ExposeMode=NO' in System
  Configuration Editor.
  1. Start CATIAV5R16SP05.
  2. Create new CATPart file.
  3. Create a pad model and select File / Save As.
  4. Save this file in cgr.
  5. Close CATPart file.
  6. Create new CATProduct and insert some sub
  elements.
  7. Insert the previous saved cgr using 'Insert
  Existing Component' icon.
  8. Select SmarTeam / Connect.
  9. Save this product file by SmarTeam / Save
  command.
  10. Check in product file by SmarTeam / Life
  cycle / Check in command.
  11. Select checked in product file and click MB3.
  12. Select File Operation / Open.
  =>Product file is opened with read only.
  PROBLEM:
  Tree icon of CGR is not correct.
  13. Select SmarTeam / Tools / Refresh.
  PROBLEM:
  Error message is displayed.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON I-PLM Collaborative Innovation
  VERSION V5R18 GA level.
  Additional Closure Information:
  THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  Incident diagnosis
  Wrong synchronization status retrieved by
  Smarteam for .cgr files. So an error message is
  displayed when 'SmarTeam/Tools/Refresh'
  command is launched.
  Correction Explanation
  The way to retrieve synchronization status has
  been changed.
  Answer and By-pass
  The problem of the error message has been fixed.
  About the icon of the CGR, it's the same icon than
  the component icon. This is PRS.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN

     UP