HD54774: SOLIDWORKS DRAWING DOES NOT GET SAVED PROPERLY WHEN PERFORMING A SMARTEAM SAVE OR LIFE CYCLE CHECK IN

APAR status

• Closed as program error.

Error description

• SolidWorks Drawing does not get Saved properly
  when performing a SmarTeam > Save or Life
  Cycle > Check In
  .
  Detailed Scenario:
  1. Check Out for Edit  the SolidWorks Part and
  make a change to the Part
  2. Check In the part.
  3. Check Out for Edit the SolidWorks Drawing
  ==> You can see that the Drawing is being rebuild
  with the new Part modifications.
  DO NOT SAVE TO SOLIDWORKS - this is the key
  for the defect.
  4. Perform a SmarTeam > Save and then perform
  a Life Cycle -> Check In on the Drawing
  (Do not perform a Save in SolidWorks or make a
  change to the Drawing prior to performing the
  SmarTeam > Save or Life
  Cycle > Check In)
  5. View the new revision of the Drawing in
  SMARTEAM Viewer.
  ==> KO: You can see that the Drawing is not
  displayed correctly
  The Drawing appears with a view of the Part prior
  to the change.
  .
  

Local fix

Problem summary

• SolidWorks Drawing does not get Saved properly when performing
  a SmarTeam Save or Life Cycle Check In
  SolidWorks Drawing does not get Saved properly
  when performing a SmarTeam > Save or Life
  Cycle > Check In
  .
  Detailed Scenario:
  1. Check Out for Edit  the SolidWorks Part and
  make a change to the Part
  2. Check In the part.
  3. Check Out for Edit the SolidWorks Drawing
  ==> You can see that the Drawing is being rebuild
  with the new Part modifications.
  DO NOT SAVE TO SOLIDWORKS - this is the key
  for the defect.
  4. Perform a SmarTeam > Save and then perform
  a Life Cycle -> Check In on the Drawing
  (Do not perform a Save in SolidWorks or make a
  change to the Drawing prior to performing the
  SmarTeam > Save or Life
  Cycle > Check In)
  5. View the new revision of the Drawing in
  SMARTEAM Viewer.
  ==> KO: You can see that the Drawing is not
  displayed correctly
  The Drawing appears with a view of the Part prior
  to the change.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON SMARTEAM
  VERSION 5 RELEASE 17 SP4.
  Notice: the fix is based on SolidWorks2006SP5 and
  SW2007 as detected as SW API defect.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  SMARTEAM NT>XP

• Fixed component ID

  569199970

Applicable component levels

• R517 PSN

     UP