HD54371: PART DESIGN / PART IS IN UNUPDATED STATUS EVEN AFTER

APAR status

• Closed as program error.

Error description

• PART DESIGN / PART IS IN UNUPDATED STATUS
  EVEN AFTER UPDATE & SAVE.
  .
  SCENARIO:
  1. Open the CATPart.
  2. It is seen in un-updated status.
  3. Update the CATPart.
  4. Save.
  5. Open
  .
  OBSERVATION:
  Even After Updating and then saving, the CATPart
  opens in un-updated status.
  .
  EXPECTED RESULT:
  The CATPart should be saved as updated and on
  reopen should not be in un-updated status.
  .
  .
  

Local fix

Problem summary

• PART DESIGN / PART IS IN UNUPDATED STATUS EVEN AFTER
  UPDATE and SAVE
  PART DESIGN / PART IS IN UNUPDATED STATUS
  EVEN AFTER UPDATE & SAVE.
  .
  SCENARIO:
  1. Open the CATPart.
  2. It is seen in un-updated status.
  3. Update the CATPart.
  4. Save.
  5. Open
  .
  OBSERVATION:
  Even After Updating and then saving, the CATPart
  opens in un-updated status.
  .
  EXPECTED RESULT:
  The CATPart should be saved as updated and on
  reopen should not be in un-updated status.
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA
  VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE
  FIXED
  ON V5R17SP01 AND ON V5R16SP07.
  Incident Diagnosis
  PART IS IN UNUPDATED STATUS EVEN AFTER
  UPDATE and SAVE
  Correction Explanation
  A deactivated external reference does not
  impact
  the part.
  Answer and By-Pass
  None
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R516 PSN SP51607

     UP06/10/03 I 1000

• R517 PSN SP51701

     UP06/10/02 I 1000