HD53848: GSD: TRIM / CANNOT PERFORM TRIM ON SPECIFIC GEOMETRY.

APAR status

• Closed as documentation error.

Error description

• GSD: TRIM / CANNOT PERFORM TRIM ON
  SPECIFIC GEOMETRY.
  .
  SCENARIO:
  1. Launch CATIA session and open
  attached "Sampl.CATPart".
  2. Change workbench to be "GSD".
  3. Click "Trim" command (icon).
  4. Select Surface.1 and Surface.2 for "Trimmed
  elements".
  5. Click "OK". Result: "Update Error" occurs. This is
  the problem.
  .
  

Local fix

Problem summary

• GSD: TRIM / CANNOT PERFORM TRIM ON
  SPECIFIC GEOMETRY.
  .
  SCENARIO:
  1. Launch CATIA session and open
  attached "Sampl.CATPart".
  2. Change workbench to be "GSD".
  3. Click "Trim" command (icon).
  4. Select Surface.1 and Surface.2 for "Trimmed
  elements".
  5. Click "OK". Result: "Update Error" occurs. This is
  the problem.
  .
  

Problem conclusion

• THIS MODIFICATION WILL BE INCLUDED IN THE DOCUMENTATION
  DELIVERED WITH Virtual Design VERSION V5R17
  Additional Closure Information:
  THIS MODIFICATION WILL BE INCLUDED IN CATIA
  DOCUMENTATION DELIVERED WITH CATIA
  VERSION 5 RELEASE 18.
  .
  Documentation Reference:
  Generative Shape Design / Basic Tasks / Splliting /
  Trimming Geometry.
  .
  MODIFICATION:
  In case the intersection between the elements is
  not connex, an error message may be issued
  prompting you to choose the elements to be kept
  or not.
  .
  ADDITIONAL INFORMATION:
  When creating the feature, an error message can
  be issued, indicating that 'the operator cannot
  decide whether some areas must be kept are not'.
  In this case, use 'Elements to keep/remove'
  functionality: refer to 'Keeping or Removing
  Elements' paragraph.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels