HD48700: ITEV5CV5 : CAN'T OPEN CATIA IN VISUALIZATION MODE AFTER APPLYIN G THE ATTRIBUTEMAPPING XML FILE.

APAR status

• Closed as program error.

Error description

• Scenario:
  1. Make the BOM structure and its CV5 data.
  2. Select "0010.01 | PK3" and send to "CATIA V5
  As Assembly"
  3. Select the menu "Tools-Options..." and then set
  options for the attribute mapping .
  [Scenario - Normal Case]
  4. Close the CATIA and then re-launch CATIA with
  the same assembly
  5. Open properties of the assembly 'PK3
  [Scenario - Bad Case]
  6. Select the menu "Tools-Options..." and then set
  visualization mode.
  7. Close the CATIA and then re-launch CATIA with
  the same assembly.
  .
  ACTUAL RESULT:
  CATIA can't be launched with Command
  interrupted error.
  .
  EXPECTED RESULT:
  CATIA should launch in visulalisation mode without
  any error.
  .
  REGRESSION LEVEL:
  This problem did not happen in R14 SP3.
  .
  .
  

Local fix

Problem summary

• ITEV5CV5 : CAN'T OPEN CATIA IN VISUALIZATION MODE AFTER APPLYIN
  G THE ATTRIBUTEMAPPING XML FILE.
  Scenario:
  1. Make the BOM structure and its CV5 data.
  2. Select "0010.01 | PK3" and send to "CATIA V5
  As Assembly"
  3. Select the menu "Tools-Options..." and then set
  options for the attribute mapping .
   Scenario - Normal Case
  4. Close the CATIA and then re-launch CATIA with
  the same assembly
  5. Open properties of the assembly 'PK3
   Scenario - Bad Case
  6. Select the menu "Tools-Options..." and then set
  visualization mode.
  7. Close the CATIA and then re-launch CATIA with
  the same assembly.
  .
  ACTUAL RESULT:
  CATIA can't be launched with Command
  interrupted error.
  .
  EXPECTED RESULT:
  CATIA should launch in visulalisation mode without
  any error.
  .
  REGRESSION LEVEL:
  This problem did not happen in R14 SP3.
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON ENOVIA
  VERSION 5 RELEASE 17 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R16SP03,V5R15SP07 and V5R14SP09.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  ENOVIA LCA NT>X

• Fixed component ID

  569151700

Applicable component levels

• R514 PSN SP51409

     UP06/04/06 N 1000

• R515 PSN SP51507

     UP06/03/27 I 1000

• R516 PSN SP51603

     UP06/03/06 I 1000