HD46076: USING TRANSFER ELEMENTS TUBING FUNCTION, TRANSFERRED SPOOL

APAR status

• Closed as program error.

Error description

• Problem Description:
  1. Insert a new CATProduct.
  2. Place equipment and route the runs.
  3. Place a tube on the run(s).
  4. Click on Create Tubing spool icon.
  5. Click New.  Name the spool.  Select the tube from the PST.
     Click OK
  6. Click Close.  The spool is now created.
  7. Right click on the spool and select Properties.
  8. Select the Tube tab and fill in the attributes for the spopl
     click OK
  9. Click Transfer elements icon.
  10. Click Select spool(s) to transfer.
  11. Pick Spool_1.  Click OK.
  12. Elements transferred are displayed.  Click OK.
  13. The new CATProduct is created.  Expand the new CATProduct
      and RMB on the spool. Select properties
  14. The Tube tab is not displayed to show the spool attributes.
  

Local fix

Problem summary

• Using Transfer elements Tubing function, transferred spool
  does not transfer Spool attributes associated with tube
  DESCRIPTION:
  Found in version: V5R15SP1 HF6
  Defect:
  When creating a new CATProduct from an existing
  CATProduct using the
  Transfer elements tubing function, the transferred
  spool does not
  transfer the Spool attributes associated with the
  tube.
  Scenario:
  Please refer to PowerPoint attached to Vendor
  Communication for
  step-by-step scenario.
  File CCCM00106711.zip ftp'ed as 00009544.411A
  Material will be available in the following directory :
  AIX : /s/maint5/db/c000/pmr00009544.411
  The customer has officially submitted a CRITSIT
  for V5R16 GA.
  HD44803 has been created.
  It has been reported against V515 and upper
  levels.
  When APAR - HD44803 is closed, a follow up call
  will be created on
  queue USW9CD,16U.
  APAR HD44803 which was subscribed to by Lee,
  Shirley C
  has now been closed.
  APAR HD44803 IS CLOSED PER SEV1
  PROBLEM SUMMARY:
  Using Transfer elements Tubing function,
  transferred spool
  does not transfer Spool attributes associated with
  tube
  CUSTOMER UPDATE
  Scenario failed in Customer IT (its4) on R16SP0 HF2.
  Tested by Bruce B.
  R16 GA HF2 FAIL TEST
  CUSTOMER UPDATE
  Failed at WorkPlace V5R16SP1 D41 and at Customer
  V5R16 HF2 as noted:
  Tubing spool tab lost
  Message from DSA:
  Can you please give details of how the scenario
  failed. In our case
  the scenario did not fail after we installed the
  HotFix2 on R16GA.
  Could you please tell me if you see the Tube tab in
  the properties
  panel of the Spool after doing transfer Elements
  command on the Spool?
  Is any specific attribute is not getting transferred or
  you still
  don't see the "Tube" tab at all.
  Thanks.
  Best Regards,
  Qasim Khan
  CUSTOMER RESPONSE
  Please refer to the attached PowerPoint which
  depicts the failure we are
  seeing in R16HF2. The Tube Tab is displaying but
  the attributes are not
  being transferred.
  > CRITSIT - CR106711 / PMR9544 - Tubing Tab
  does not display on
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 17 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R15SP05 and V5R16SP02.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R515 PSN

     UP

• R516 PSN SP51602

     UP06/01/04 I 1000