HD44024: GPS : IN OCTREE, WITH A PARTICULAR SIZE OF MESH, COMPUTATION IS VERY LONGER.

APAR status

• Closed as program error.

Error description

• GPS : In Octree, with a particular size of mesh,
  computation is very longer.
  SCENARIO:
  1. Open the provided CATAnalysis
  2. Double click 'OCTREE Tetrahedron Mesh.1' in the
  tree.
  3. Change value of Size to 81mm, and click OK
  button.
  4. Click Compute icon.
  5. Select "Mesh Only" as Compute option, and Click
  OK Button.
  PROBLEM:
  Even if it waits 30 minutes or more, result is not
  displayed. (Mesh is not generated.)
  It will be in a loop state.
  .
  

Local fix

Problem summary

• GPS : In Octree, with a particular size of mesh, computation is
  very longer.
  GPS : In Octree, with a particular size of mesh,
  computation is very longer.
  SCENARIO:
  1. Open the provided CATAnalysis
  2. Double click 'OCTREE Tetrahedron Mesh.1' in the
  tree.
  3. Change value of Size to 81mm, and click OK
  button.
  4. Click Compute icon.
  5. Select "Mesh Only" as Compute option, and Click
  OK Button.
  PROBLEM:
  Even if it waits 30 minutes or more, result is not
  displayed. (Mesh is not generated.)
  It will be in a loop state.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 17 GA level.
  .
  Incident Diagnosis
  CPU loop due to a tolerance problem during V4
  geometry import
  .
  Correction Explanation
  CPU loop has been corrected
  .
  Answer and By-Pass
  change global size
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R516 PSN

     UP