HD39100: GENERATIVE DRAFTING - HIDDEN LINES REAPPEAR IN SHOW MODE AFTER AN UPDATE OF THE CATDRAWING

APAR status

• Closed as unreproducible in next release.

Error description

• Generative Drafting - Hidden lines reappear in
  SHOW mode after an update of the CATDrawing
  .
  SCENARIO:
  - Open customer's CATPart
  - File / New from: select customer's CATDrawing
  - Select "All Views" icon from 'Wizard' Toolbar
  and Select xy-plane from CATPart from spec. tree
  and generate the drawing
  - Select all views from spec. tree - RMB -
  Properties: Activate "Hidden Lines"
  from "Properties"
  - Select all hidden lines from front view - RMB -
  Hide
  - Change to 3D - modus and change the diameter
  of hole.2 (double click) from 10 to 11 mm
  - Update the 3D-model
  - Change to 2D modus
  - Update drawing
  .
  RESULT:
  Some of the lines become visible
  .
  

Local fix

Problem summary

• Generative Drafting - Hidden lines reappear in SHOW mode after
  an update of the CATDrawing
  Generative Drafting - Hidden lines reappear in
  SHOW mode after an update of the CATDrawing
  .
  SCENARIO:
  - Open customer's CATPart
  - File / New from: select customer's CATDrawing
  - Select "All Views" icon from 'Wizard' Toolbar
  and Select xy-plane from CATPart from spec. tree
  and generate the drawing
  - Select all views from spec. tree - RMB -
  Properties: Activate "Hidden Lines"
  from "Properties"
  - Select all hidden lines from front view - RMB -
  Hide
  - Change to 3D - modus and change the diameter
  of hole.2 (double click) from 10 to 11 mm
  - Update the 3D-model
  - Change to 2D modus
  - Update drawing
  .
  RESULT:
  Some of the lines become visible
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5RELEASE 14.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 16 GA level AND ON
  V5R15SP01 AND ON V5R14SP07 LEVELS
  All elements in no show stay now in no show after
  the CATDrawing update
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 AIX

• Fixed component ID

  569101000

Applicable component levels

• R514 PSN SP51407

     UP05/07/05 N 1000