HD33227: AMG / APT / MIRRORING MACHINING AXIS OR TRACUT STATEMENT, SOME APT STATEMENT ARE NOT MIRRORED.

APAR status

• Closed as program error.

Error description

• AMG / APT / Mirroring machining axis or tracut
  statement, some APT statement are not mirrored.
  .
  Scenario :
  - put the variable MFG_BATCH_SPLIT_CIRCLE=1 in
  your environment variable
  - open CATIA
  - open CATProcess
  - generate aptsource in batch mode with following
  options : circular interpolation (Z-axis circles);
  circle radius limits (auto); copy/tracut processing
  (yes); tool motion statement (automatic);
  information statement ($$); rapid federate
  (rapid); rapid federate at start (no); syntax used
  (yes); home point strategy (none); GOTO for tool
  change (yes)
  .
  Problem :
  In the apt file, some statements are not mirrored.
  .
  

Local fix

Problem summary

• AMG / APT / Mirroring machining axis or tracut statement, some
  APT statement are not mirrored.
  AMG / APT / Mirroring machining axis or tracut
  statement, some APT statement are not mirrored.
  .
  Scenario :
  - put the variable MFG_BATCH_SPLIT_CIRCLE=1 in
  your environment variable
  - open CATIA
  - open CATProcess
  - generate aptsource in batch mode with following
  options : circular interpolation (Z-axis circles);
  circle radius limits (auto); copy/tracut processing
  (yes); tool motion statement (automatic);
  information statement ($$); rapid federate
  (rapid); rapid federate at start (no); syntax used
  (yes); home point strategy (none); GOTO for tool
  change (yes)
  .
  Problem :
  In the apt file, some statements are not mirrored.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 15 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R14SP05.
  .
  Incident Diagnosis :
  Pb on mirroring transformation type. angle must be
  inverted.
  .
  Correction Explanation :
  Pb on mirroring transformation type. angle must be
  inverted.
  .
  Answer and By-Pass :
  No use of split cricle
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R513 PSN

     UP

• R514 PSN SP51405

     UP05/03/31 N 1000