HD29747: DMUNAV: CUMULATIVE SNAP CREATE NON-ISOMETRIC MATRIX.

APAR status

• Closed as program error.

Error description

• ABSTRACT: DMUNAV: CUMULATIVE SNAP CREATE
  NON-ISOMETRIC MATRIX.
  .
  SCENARIO:
  1. Launch catia.
  2. File + Open: Product1.CATProduct.
  3. Start + DMU + DMU Navigator.
  4. Select "Cumulative Snap" Function.
  5. Select part to move: Part1.CATPart.
  6. Select Yellow face.
  7. Select Green face.
  8. Select Invert + Accept.
  9. Hide Part3.CATPart.
  9. File + Save Management: Save all modified data.
  10. File + Close.
  11. File + Open: Product1.CATProduct.
  12. Show Part1.2.
  13. Analyse Matrix position of Part1.2
  with "Translation or Rotation" + "Position". Matrix
  position is displayed.
  14. Analyse Matrix position of Part1.1
  with "Translation or Rotation" + "Position".
  .
  RESULT: Same matrix position of Part1.2 is
  displayed but graphic representation is different. It
  isn't normal. Where is the infomation concerning
  non-ismetrique matrix on Part1.1. What is the
  utility of create a non-isometric matrix when we
  have a function to create symmetry of part
  (Symmetry function) in same toolbar of Cumulative
  snap function.
  .
  

Local fix

Problem summary

• DMUNAV: CUMULATIVE SNAP CREATE NON-ISOMETRIC MATRIX.
  ABSTRACT: DMUNAV: CUMULATIVE SNAP CREATE
  NON-ISOMETRIC MATRIX.
  .
  SCENARIO:
  1. Launch catia.
  2. File + Open: Product1.CATProduct.
  3. Start + DMU + DMU Navigator.
  4. Select "Cumulative Snap" Function.
  5. Select part to move: Part1.CATPart.
  6. Select Yellow face.
  7. Select Green face.
  8. Select Invert + Accept.
  9. Hide Part3.CATPart.
  9. File + Save Management: Save all modified data.
  10. File + Close.
  11. File + Open: Product1.CATProduct.
  12. Show Part1.2.
  13. Analyse Matrix position of Part1.2
  with "Translation or Rotation" + "Position". Matrix
  position is displayed.
  14. Analyse Matrix position of Part1.1
  with "Translation or Rotation" + "Position".
  .
  RESULT: Same matrix position of Part1.2 is
  displayed but graphic representation is different. It
  isn't normal. Where is the infomation concerning
  non-ismetrique matrix on Part1.1. What is the
  utility of create a non-isometric matrix when we
  have a function to create symmetry of part
  (Symmetry function) in same toolbar of Cumulative
  snap function.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 15 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R14SP04.
  .
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R14 SP03.
  .
  Correction Explanation:
  As requested by customer, expoirting the
  environement variable "ONLY_ISO_MATRIX" , the
  Cumulative Snap AND the SmartTarget will no
  longer propose the button "Invert by Symmetry".
  .
  Answer and By-Pass:
  Corrected.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 HP-UX

• Fixed component ID

  569102000

Applicable component levels

• R512 PSN

     UP

• R513 PSN

     UP

• R514 PSN SP51404

     UP05/02/11 N 1000