HD25862: ASS DSG : SWITCH TO DESIGN OCCUR A MODIFIED STATUS OF PRODUCT

APAR status

• Closed as fixed if next.

Error description

• SWITCH TO DESIGN OCCUR A MODIFIED STATUS
  OF PRODUCT
  .
  CACHE has to be activated in CV5
  1) Logon to EV5. Launch CV5
  2) Search for Product Stander_B211_30_K (search
  on product with *B211_30_K)
  3) Send PRC to CV5 as assembly in vizualization
  mode.
  4) In CV5 switch PRC to Design mode. Select PRC,
  contextual menu Representation / Design mode
  5) File / Save Management
  Result : parts from assembly levels are flagged as
  Modified
  When closing CATProduct window you are prompt
  to save
  .
  .
  

Local fix

Problem summary

• ASS DSG : SWITCH TO DESIGN OCCUR A MODIFIED STATUS OF PRODUCT
  SWITCH TO DESIGN OCCUR A MODIFIED STATUS
  OF PRODUCT
  .
  CACHE has to be activated in CV5
  1) Logon to EV5. Launch CV5
  2) Search for Product Stander_B211_30_K (search
  on product with *B211_30_K)
  3) Send PRC to CV5 as assembly in vizualization
  mode.
  4) In CV5 switch PRC to Design mode. Select PRC,
  contextual menu Representation / Design mode
  5) File / Save Management
  Result : parts from assembly levels are flagged as
  Modified
  When closing CATProduct window you are prompt
  to save
  .
  .
  

Problem conclusion

Temporary fix

Comments

• THIS PROBLEM WILL BE FIXED ON ENOVIA
  VERSION 5 RELEASE 15 GA level.
  .
  Given an assembly of CATParts with publications in
  Enovia and with Visu Mode, when switching from
  Visu to Design Mode, the parent products are seen
  as modified.
  .
  Why?
  Because publications are instanciated on instance
  of CATParts, which lead to a modification of
  product. The instanciation is normal and is
  observed also at open directly in Design Mode, but
  in this case it has no impact on modified status.
  .
  This cannot be corrected easily, because this is a
  data model issue. A development (Virtual Instance)
  is planned in R15 to avoid this type of problem.
  .
  In R13, this doesn't block the save. No correction
  can be offered on this level.
  .
  On R14, a by-pass should be available with
  Selective Loading project: The part could be
  opened in ProdMode, which solves the problem of
  instanciation of publication.
  .
  In resume: the described problem should be
  corrected completely in R15, have a by-pass in R14
  and seems to be not blocking in R13.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels

• R513 PSN

     UP

• R514 PSN

     UP