HD25347: DMUSPA : VARIATION ERROR.

APAR status

• Closed as program error.

Error description

• DMUSPA : VARIATION ERROR.
  SCENARIO:
  1. Start CATIA.
  2. Select ﾨToolsﾨ, ﾨOptionsﾨ from menu bar.
  3. Select ﾨReset parametersﾨ button, ﾨResetﾨ
  window opens.
  4. Select ﾨfor all the tabpagesﾨ option.
  5. Select ﾨYesﾨ to close reset window and ﾨOKﾨ to
  reset all options to default.
  6. Open ﾨSample.CATProductﾨ.
  7. Change the workbench to ﾨDMU Space Analysisﾨ.
  8. Select the ﾨSectioningﾨ icon.
  9. Select the ﾨResultﾨ tab and then ﾨClash
  Detectionﾨ icon in the ﾨSectioning Definitionﾨ
  window.
  10.Select the ﾨEdit Position And Dimensionsﾨ button
  under the ﾨPositioningﾨ tab ﾨEdit Position and
  Dimensionsﾨ window appears.
  11.Set ﾨXﾨ in the ﾨOriginﾨ field to ﾨ0mmﾨ and click
  in the ﾨYﾨ field to activate change and then click
  in "Z" field. The ﾨSection.1ﾨ screen will be incorrect.
  .
  RESULT:On AIX, just after selecting the key in field
  of "Z",the two message windows appear. They are
  not shown on WinXP.
  .
  EXPECTED RESULT:The behavior of AIX and WinXP
  should be equal.
  .
  

Local fix

Problem summary

• DMUSPA : VARIATION ERROR.
  DMUSPA : VARIATION ERROR.
  SCENARIO:
  1. Start CATIA.
  2. Select ?Tools?, ?Options? from menu bar.
  3. Select ?Reset parameters? button, ?Reset?
  window opens.
  4. Select ?for all the tabpages? option.
  5. Select ?Yes? to close reset window and ?OK? to
  reset all options to default.
  6. Open ?Sample.CATProduct?.
  7. Change the workbench to ?DMU Space Analysis?.
  8. Select the ?Sectioning? icon.
  9. Select the ?Result? tab and then ?Clash
  Detection? icon in the ?Sectioning Definition?
  window.
  10.Select the ?Edit Position And Dimensions? button
  under the ?Positioning? tab ?Edit Position and
  Dimensions? window appears.
  11.Set ?X? in the ?Origin? field to ?0mm? and click
  in the ?Y? field to activate change and then click
  in "Z" field. The ?Section.1? screen will be incorrect.
  .
  RESULT:On AIX, just after selecting the key in field
  of "Z",the two message windows appear. They are
  not shown on WinXP.
  .
  EXPECTED RESULT:The behavior of AIX and WinXP
  should be equal.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA
  VERSION 5 RELEASE 15 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE
  FIXED ON V5R14SP02.
  .
  Now the message boxes donot appear.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA VERSION 5

• Fixed component ID

  569101000

Applicable component levels

• R516 PSN

     UP

• R514 PSN

     UP

• R517 PSN

     UP

• R515 PSN

     UP

• R518 PSN

     UP