HD25090: DIGITIZED SHAPE EDITOR / CATIA LOOP WHEN THE HOLE IS FILLED WIT H FULL FILL

APAR status

• Closed as unreproducible in next release.

Error description

• DIGITIZED SHAPE EDITOR / CATIA LOOP WHEN
  THE HOLE IS FILLED WITH FULL FILL
  .
  

Local fix

Problem summary

• DIGITIZED SHAPE EDITOR / CATIA LOOP WHEN THE HOLE IS FILLED WIT
  H FULL FILL
  DIGITIZED SHAPE EDITOR / CATIA LOOP WHEN
  THE HOLE IS FILLED WITH FULL FILL
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 13.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 15 GA level.
  .
  Problem Diagnostics:
  In catia V5R13SP04 , when the Fill Hole Command
  was used with values of Sag : 0.01 , Step : 0.1 and
  Shape : 1 , catia goes in a loop and finally abends
  when clicked on the OK button of Fill Hole after
  Apply.
  .
  Reason:
  In CATIAV5R15 , catia does not go in loop and the
  Fill hole is possible with the above extreme values
  except for it takes a long time to complete. The
  patched surface in R15 is attached and send back.
  .....
  .....
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R515 PSN

     UP