HD23014: ITEV5CV5 : CCP LINK BETWEEN TWO CATPARTS IS BROKEN IF THEY ARE SENT TO CATIA IN A SPECIFIC SEQUENCE

APAR status

• Closed as unreproducible in next release.

Error description

• Abstract:
  ITEV5CV5 : CCP LINK BETWEEN TWO CATPARTS
  IS BROKEN IF THEY ARE SENT TO CATIA IN A
  SPECIFIC SEQUENCE
  Scenario:
  Two parts have been created in Catia and saved to
  Enovia (Part1 and Part2). Part2 has a linked
  surface copied from Part1. The copy procedure
  created a CCP link (not a context link).
  Problem: If part2 is sent to Catia before Part1,
  geometry link is broken. (often occurs when multi
  selecting). User will not be able to see if link needs
  to be syncronized and user can not activate the link
  in this stage.
  1. In Enovia LCA V5 R12 SP6:
  2. Create PRC.
  3. Open PRC in Product Editor.
  4. Send PPC to Catia V5.
  5. Create a detailed part (Part1).
  6. Create a surface in Part1.
  7. Create a new part (Part2).
  8. Activate Part1.
  9. Copy the surface in Part1.
  10. Right click on Part2 and select "open in new
  window" (in Part2.1 Object menu).
  11. In the new window: Paste the surface using
  paste special, AsResultWithLink (CCP link
  established).
  12. Close the new window (press no when asked if
  save the modification).
  13. Save to Enovia.
  14. Close window in Catia.
  15. Send Part2 to Catia (important to send out
  Part2 before Part1).
  16. Send Part1 to Catia.
  17. Activate Part2 and select Links.. in Edit menu.
  Result: The status of CCP link to Part1
  is "Reference not found". This is a problem.
  Expected result: The staus should be "OK" or "Not
  synchronized".
  18. Close the assembly in Catia.
  19. From Enovia. send Part1 to Catia (important to
  send out Part1 before Part2).
  20. Send Part2 to Catia.
  21. Activate Part2 and select Links.. in Edit menu.
  Result: The status of CCP link to Part1 is now "OK".
  .
  

Local fix

Problem summary

• ITEV5CV5 : CCP LINK BETWEEN TWO CATPARTS IS BROKEN IF THEY ARE
  SENT TO CATIA IN A SPECIFIC SEQUENCE
  Abstract:
  ITEV5CV5 : CCP LINK BETWEEN TWO CATPARTS
  IS BROKEN IF THEY ARE SENT TO CATIA IN A
  SPECIFIC SEQUENCE
  Scenario:
  Two parts have been created in Catia and saved to
  Enovia (Part1 and Part2). Part2 has a linked
  surface copied from Part1. The copy procedure
  created a CCP link (not a context link).
  Problem: If part2 is sent to Catia before Part1,
  geometry link is broken. (often occurs when multi
  selecting). User will not be able to see if link needs
  to be syncronized and user can not activate the link
  in this stage.
  1. In Enovia LCA V5 R12 SP6:
  2. Create PRC.
  3. Open PRC in Product Editor.
  4. Send PPC to Catia V5.
  5. Create a detailed part (Part1).
  6. Create a surface in Part1.
  7. Create a new part (Part2).
  8. Activate Part1.
  9. Copy the surface in Part1.
  10. Right click on Part2 and select "open in new
  window" (in Part2.1 Object menu).
  11. In the new window: Paste the surface using
  paste special, AsResultWithLink (CCP link
  established).
  12. Close the new window (press no when asked if
  save the modification).
  13. Save to Enovia.
  14. Close window in Catia.
  15. Send Part2 to Catia (important to send out
  Part2 before Part1).
  16. Send Part1 to Catia.
  17. Activate Part2 and select Links.. in Edit menu.
  Result: The status of CCP link to Part1
  is "Reference not found". This is a problem.
  Expected result: The staus should be "OK" or "Not
  synchronized".
  18. Close the assembly in Catia.
  19. From Enovia. send Part1 to Catia (important to
  send out Part1 before Part2).
  20. Send Part2 to Catia.
  21. Activate Part2 and select Links.. in Edit menu.
  Result: The status of CCP link to Part1 is now "OK".
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  ENOVIA VERSION 5 RELEASE 12.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  ENOVIA VERSION 5 RELEASE 14 GA level AND ON
  V5R13SP05.
  Incident Diagnosis:
  CATIA is unable to reconnect the link between two
  parts if the pasted part is loaded first.
  Answer and By-Pass on V5R12:
  Load firstly the copied part on V5R12. This problem
  is already corrected and unreproducible due to New
  Ref-Ref links on the above mentioned levels.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5/NT/200

• Fixed component ID

  569151000

Applicable component levels

• R512 PSN

     UP

• R513 PSN SP51305

     UP04/07/16 N 1000