HD22495: DOCDIREC : NEW DOCUMENT REVISION IS NOT SEND TO CATIA WHEN SEND ING PART, OLD DOCUMENT REVISION IS SENT

APAR status

• Closed as program error.

Error description

• DOCDIREC : NEW DOCUMENT REVISION IS NOT
  SEND TO CATIA WHEN SENDING PART, OLD
  DOCUMENT REVISION IS SENT
  ABSTRACT: New document revision is not send to
  CATIA when sending
  Part, old document revision is sent.
  .
  DETAILED DESCRIPTION:
  If you revise a document from --- to --A that is
  attached to a Part
  version --- the document revision --- will be sent to
  CATIA even though
  --- A is the only attached document revesion.
  Send to CATIA as Assembly will not work!!!
  .
  Step by step scenario:
  1. Create a PRC
  2. Open the PRC in Product Editor
  3. Send the PRC to CATIAv5
  4. Insert a new Part to the PRC and create a simple
  geomerty
  5. Save to ENOVIA LCA and close the work in
  CATIA
  6. Make a refresh in Product Editor
  7. Unlock the Document
  8. Select the Part and click on the Documents tab
  9. Expand primary, right click the Document and
  select change status
  10. Promote the document twice
  11. Right click the Document and select new
  revision
  12. Perform a local refresh in Product Editor
  13. Select the document --A in Instance view and
  lock it
  14. Right click the document --A in Instance view
  and send it to CATIA
  15. Make a change to the geomerty and save to
  ENOVIA LCA, close the
  work in CATIA
  16. Save (unlock all) in ENOVIA Product Editor
  17. Right click the Part --- in Instance view and
  send it to CATIA
  18. Problem: Document revision --- is opened in
  CATIA, the change made
  in step 15 cannot be seen
  19. Return to ENOVIA Product Editor, right click the
  PRC and select
  Send to CATIA as Assembly
  .
  20. Problem: Document revision --- is opened in
  CATIA, the change made in step 15 cannot be seen
  .
  .
  

Local fix

Problem summary

• DOCDIREC : NEW DOCUMENT REVISION IS NOT SEND TO CATIA WHEN SEND
  ING PART, OLD DOCUMENT REVISION IS SENT
  DOCDIREC : NEW DOCUMENT REVISION IS NOT
  SEND TO CATIA WHEN SENDING PART, OLD
  DOCUMENT REVISION IS SENT
  ABSTRACT: New document revision is not send to
  CATIA when sending
  Part, old document revision is sent.
  .
  DETAILED DESCRIPTION:
  If you revise a document from --- to --A that is
  attached to a Part
  version --- the document revision --- will be sent to
  CATIA even though
  --- A is the only attached document revesion.
  Send to CATIA as Assembly will not work!!!
  .
  Step by step scenario:
  1. Create a PRC
  2. Open the PRC in Product Editor
  3. Send the PRC to CATIAv5
  4. Insert a new Part to the PRC and create a simple
  geomerty
  5. Save to ENOVIA LCA and close the work in
  CATIA
  6. Make a refresh in Product Editor
  7. Unlock the Document
  8. Select the Part and click on the Documents tab
  9. Expand primary, right click the Document and
  select change status
  10. Promote the document twice
  11. Right click the Document and select new
  revision
  12. Perform a local refresh in Product Editor
  13. Select the document --A in Instance view and
  lock it
  14. Right click the document --A in Instance view
  and send it to CATIA
  15. Make a change to the geomerty and save to
  ENOVIA LCA, close the
  work in CATIA
  16. Save (unlock all) in ENOVIA Product Editor
  17. Right click the Part --- in Instance view and
  send it to CATIA
  18. Problem: Document revision --- is opened in
  CATIA, the change made
  in step 15 cannot be seen
  19. Return to ENOVIA Product Editor, right click the
  PRC and select
  Send to CATIA as Assembly
  .
  20. Problem: Document revision --- is opened in
  CATIA, the change made in step 15 cannot be seen
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON ENOVIA
  VERSION 5 RELEASE 14 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R13SP06.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  ENOVIA LCA NT/2

• Fixed component ID

  569151700

Applicable component levels

• R512 PSN

     UP

• R513 PSN SP51306

     UP04/09/08 N 1000

• R514 PSN

     UP